99 lumina starts then dies after head gaskets
Senior Member
Posts like a Turbo
Joined: Dec 2003
Posts: 249
Likes: 43
From: Baldwin,New York
no havent checked the maf...i just took the whole duct work off as one piece...but i did have trouble with the map sensor that bolts to the upper plenum...dropped one of the screws and couldnt find it...is only on with one screw if that could make a difference...i,ve had to put it on the back burner for now until i get some free time
Thread Starter
Junior Member
Posts like a Ricer Type-R
Joined: Jun 2016
Posts: 13
Likes: 1
just waiting on new o-rings and sleeves to come from napa in the morning....i hope that helps...getting on my nerves...i dropped one of the map sensor screws to the manifold...maybe i can find one at the junkyard tomorrow
Thread Starter
Junior Member
Posts like a Ricer Type-R
Joined: Jun 2016
Posts: 13
Likes: 1
its running good now...i guess it was the fuel injector o-rings...now i have a small coolant leak on the little pipe thing in front of the valve cover...gonna pull it and try to fix it when it cools down
Senior Member
True Car Nut
Joined: Jun 2011
Posts: 3,493
Likes: 613
From: VA
