DIC PO123
Thread Starter
Member
Posts like a V-Tak
Joined: Oct 2010
Posts: 84
Likes: 18
From: Georgia
DIC PO123
I must be getting too old for this! Got a check engine light on the 1994 Le Sabre today. Hooked up my trusty Actron scanner and got PO123-TPS signal high. I thought all the OBD I codes were two digit numbers?
Joel
Joel
Senior Member
True Car Nut
Joined: Jun 2003
Posts: 7,270
Likes: 464
From: Las Cruces, NM
94 is a GM OBD 1.5 year for the 3.8, so OBD 1 communication protocols, OBD 2 codes.
https://www.obd-codes.com/p0123
I am just glad to hear you have a scanner to read it. That is the biggest hurdle to overcome usually.
It'* usually either the TPS or wiring.
https://www.obd-codes.com/p0123
I am just glad to hear you have a scanner to read it. That is the biggest hurdle to overcome usually.
It'* usually either the TPS or wiring.
Thread Starter
Member
Posts like a V-Tak
Joined: Oct 2010
Posts: 84
Likes: 18
From: Georgia
Thanks for the replies.
Yea, it is one those 1.5 OBD'*. I've always had good luck with the Actron CP9145.
For some reason that code just looked odd. But the scanner is showing 4.25 volts at idle, with 4.75 wide open throttle. I'll do some more testing before changing the TPS, but looks like that'* the problem.
Joel
Yea, it is one those 1.5 OBD'*. I've always had good luck with the Actron CP9145.
For some reason that code just looked odd. But the scanner is showing 4.25 volts at idle, with 4.75 wide open throttle. I'll do some more testing before changing the TPS, but looks like that'* the problem.
Joel
Thread
Thread Starter
Forum
Replies
Last Post
