System ideas (fiberglass all the way)
#21
Senior Member
Posts like a Northstar
Join Date: Feb 2004
Location: Fargo, ND
Posts: 685
Likes: 0
Received 0 Likes
on
0 Posts
I am the last person that should be judging anyone on how their system is set up. I thought your setup looked great. I was just informing anyone who didn't know about the battery location. I guess the way you worded it didn't click for me.
#22
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Feb 2008
Location: Chesterfiield, MI
Posts: 422
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by lglarum
I am the last person that should be judging anyone on how their system is set up. I thought your setup looked great. I was just informing anyone who didn't know about the battery location. I guess the way you worded it didn't click for me.
yea i tend to ramble and then screw up and not catch it.
#23
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Feb 2008
Location: Chesterfiield, MI
Posts: 422
Likes: 0
Received 0 Likes
on
0 Posts
welp today i start my project. im not going to get the fiberglass till next week but for now im going to be cleaning out the trunk. getting all the old sytstem wires out that i dont need right now. moving stuff around thats in the way and just staring at it to get some ideas of placement.
if i acually do anything noticable ill throw up some pics of my project
if i acually do anything noticable ill throw up some pics of my project
#25
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Feb 2008
Location: Chesterfiield, MI
Posts: 422
Likes: 0
Received 0 Likes
on
0 Posts
ok its been a while and i havent really got that far due to the fiberglass and i arnt getting along but heres what i have so far
slick94prix i hope you dont mind but i kinda used your idea for the amp mount cuz the couple idea i had were near impossible
there will be a fiberglass cover that goes around the amps so you wont see any of that wood or wires. cant really tell but the amps are at a double angle
i didnt keep the passthrough useable but it still does serve a purpose so that i can read the vltage on the CAP
didnt want it looking like crap either when you open the armrest to see the CAP so heres what i did
all the trunk carpet will adventually be black but i cut it so that when the enclusures are sitting on it and bolted down i dont have to take out the sub to unbolt the enclosure and all that crap just to get to the spare or what have you. i cut it at the amps too. i thought ahead alil bit :o
i acually ended up retaping the area the plastic didnt work out like i planned but i didnt get a pic of the retape
the left side with only two layer
and the right side with 4/5 still kinda tacky here. and the carper i was using to make like a cave and put heaters inside to help cure.
i dont know when ill through up some pics. ill be kinda busy wont get to work on it too much until next week
and i know it looks like crap iv learned to much about glassing though...... but after what i have already done ofcourse
slick94prix i hope you dont mind but i kinda used your idea for the amp mount cuz the couple idea i had were near impossible
there will be a fiberglass cover that goes around the amps so you wont see any of that wood or wires. cant really tell but the amps are at a double angle
i didnt keep the passthrough useable but it still does serve a purpose so that i can read the vltage on the CAP
didnt want it looking like crap either when you open the armrest to see the CAP so heres what i did
all the trunk carpet will adventually be black but i cut it so that when the enclusures are sitting on it and bolted down i dont have to take out the sub to unbolt the enclosure and all that crap just to get to the spare or what have you. i cut it at the amps too. i thought ahead alil bit :o
i acually ended up retaping the area the plastic didnt work out like i planned but i didnt get a pic of the retape
the left side with only two layer
and the right side with 4/5 still kinda tacky here. and the carper i was using to make like a cave and put heaters inside to help cure.
i dont know when ill through up some pics. ill be kinda busy wont get to work on it too much until next week
and i know it looks like crap iv learned to much about glassing though...... but after what i have already done ofcourse
#27
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Feb 2008
Location: Chesterfiield, MI
Posts: 422
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by slick94prix
Like I said, if your willing to drive down to Toledo, I'll give you a hand.
but im one to tough it out my self.
i wont feel as acomplished
but thanks for the offer. ill have to make a trip to show ya in person one time.
or you could come up
looking to put a meet together in may
http://www.bonnevilleclub.com/forum/...ic.php?t=94684
#29
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Feb 2008
Location: Chesterfiield, MI
Posts: 422
Likes: 0
Received 0 Likes
on
0 Posts
and heres some pics of all more work i got done
and all covered up with enclosure carpet
and all wetted down ready for some glass tomarrow
and all covered up with enclosure carpet
and all wetted down ready for some glass tomarrow