Self Install
#21
Senior Member
Posts like a Corvette
Join Date: Aug 2010
Posts: 1,337
Likes: 0
Received 0 Likes
on
0 Posts
#22
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Dec 2009
Location: New York
Posts: 305
Likes: 0
Received 0 Likes
on
0 Posts
Alright I'm back with 2 bits of good news and some bad news. The good news is that I got my dash off and that all of my stuff is here. The bad news is that I have NO idea how to install it.
I'm confused about everything to be completely honest. If anyone could help me out, that would be amazing.
I'm confused about everything to be completely honest. If anyone could help me out, that would be amazing.
#23
Senior Member
True Car Nut
okay to make it simple remove the stock radio the take your harness'* with the white plastic end and the black platic end strip a little bit of the coating at the end of each wire and color match i.e. twist them together and cap the tape them or sauder them whichever you prefer then plug the white end into your stock connector now plug your antenna adapter into the antenna wire okay for the stereo its self slide your mount over it then there is already an additional metal ''case around your deck and you flip the tabs that are on it up against the mount with a flat head screwdriver then you plug it all in and screw the mount/stereo in TIP make sure you have power sound ect before screwing it in and replacing the trim panel if all works screw it in put on your trim panel and enjoy
#27
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Dec 2009
Location: New York
Posts: 305
Likes: 0
Received 0 Likes
on
0 Posts
#28
Senior Member
True Car Nut
Join Date: Mar 2010
Location: Eaton Rapids MI
Posts: 2,964
Likes: 0
Received 0 Likes
on
0 Posts
Good to see we could help.. I change my cd player every week! lol u will get it down. Rear speakers are easy.
1.Pop trunk and unplug speakers from the back
2. get in the back seat, pop the screens/grills off and remove the 6x9 and plastic mounting riser as a hole
3. take old 6x9s out of the risers and install new 6x9'*
4. ur gonna have to cut the plugs off the end of the wires going to your speakers because the new 6x9'* wont have the same hook ups. just make sure u keep negative to negative and positive to positive
1.Pop trunk and unplug speakers from the back
2. get in the back seat, pop the screens/grills off and remove the 6x9 and plastic mounting riser as a hole
3. take old 6x9s out of the risers and install new 6x9'*
4. ur gonna have to cut the plugs off the end of the wires going to your speakers because the new 6x9'* wont have the same hook ups. just make sure u keep negative to negative and positive to positive
#29
Senior Member
True Car Nut
yeah its pretty easy and capping is better cause you never know if your going to need that deck in another vehicle if u solder u gotta cut stuff lol
Thread
Thread Starter
Forum
Replies
Last Post
Xtrmgtp
General GM Chat
17
11-10-2003 01:28 PM