no no no no no.....

that little plug isnt for the stock speaker, the stock speaker plug i cut off and put in glove box, this looks like a little plug for lord kows what...

i tried putting my new speaker wires on that little plug and still it does not want to work....

im mad... should i see if best buy can do this? but i dont want to pay them $40 for one speaker,...

if you tried the wires that ran to the plug that went to the factory speakers and it did not work then you got me. are you sure that is what you did? you are not running a amp are you? if you are just putting in new speakers to the stock radio you need to connect your speaker wires to the wires of the plug that was going to the stock speakers. cut the plug off and run 2 wires from each one. one to the tweeter/mid and one to the woofer. do this on both side and ypu should be all good

after messing aroudn wiht it for almsot 2 hours i have concluded its just a weak as hell signal ont he driver rear side.... i can get it to play BUT just faintly...

so what i did was runk a wire from the other 6x9 to this one and it works now but now its mono, not stereo :(


ahhhh, can best buy do stereo system re-wirings or who can? how much?

you can for free. just pull the stereo out and find the wires that are supposed to be the speaker wires. cut them and run new wire to the speakers. just leave the old and hind the new. i am sure some one has the color codes for your radio