HELP PLEASE, UPGRADING STEREO!
Thread Starter
Senior Member
Certified GM nut
Joined: Jun 2004
Posts: 1,719
Likes: 0
From: Grand Haven, Michigan

I know that there are probably some post out there already with this but anywho.... I have the stock cassette player in my '92 ssei and want to upgrade to a pioneer head unit ( P/N DEH-P2600). I was wondering if it was possible to obtain the use of my stearing wheel controls and if so, what parts will i need to do it (cost included, im on a budget). I would appreciate some help here. Thanks!
First you have to ensure that your deck is remote control compatible.
Then you'll need to get a kit from crutchfield or similar to allow it to run the buttons on your wheel.. I dont' have the link for that kit.. but I"m sure someone here does.
Then you'll need to get a kit from crutchfield or similar to allow it to run the buttons on your wheel.. I dont' have the link for that kit.. but I"m sure someone here does.
www.partsexpress.com www.selectproducts.com One of those should have it, if not im sure someone else can help you with it.
Thread Starter
Senior Member
Certified GM nut
Joined: Jun 2004
Posts: 1,719
Likes: 0
From: Grand Haven, Michigan

Would i be able to install it myself? I went to google and searched that and i found this would the bonneville be under the one that says "General Motors: any 1992-and up vehicle with steering wheel airbags and climate controls"? And would that work with a Pioneer head unit part number DEH-P2600? And how does it work?
yes you can do it yourself, its just time consuming
that is the correct model
it would work with a pionner 2600 cuz it has a wireless remote
what the unit does it send out a wireless signal when you press a steering wheel button. when you press the button, it goes into the pac swi-x, and that unit sends a wireless infared signal to the cd player. you have you mount the little transmitter, most people with bonnevilles put them in the shifter **** boot. as long as there is a visible view from the transmitter to the cd player, you are good
that is the correct model
it would work with a pionner 2600 cuz it has a wireless remote
what the unit does it send out a wireless signal when you press a steering wheel button. when you press the button, it goes into the pac swi-x, and that unit sends a wireless infared signal to the cd player. you have you mount the little transmitter, most people with bonnevilles put them in the shifter **** boot. as long as there is a visible view from the transmitter to the cd player, you are good
pdf instruction manual - http://www.go2pac.com/instructions/swixinstr%20new.pdf
i know a couple of cardomain members have em, but i cant remember who, but heres what it looks like, i saved the pic a long time ago
i know a couple of cardomain members have em, but i cant remember who, but heres what it looks like, i saved the pic a long time ago
Thread
Thread Starter
Forum
Replies
Last Post
FieroGT42
Audio (and aftermarket electronics)
5
Nov 11, 2005 12:57 AM
NERV
Audio (and aftermarket electronics)
6
Jun 18, 2004 08:53 AM
parallelcircuits
Audio (and aftermarket electronics)
27
Sep 30, 2003 07:32 AM
Buddha Jones
Performance, Brainstorming & Tuning
9
Sep 27, 2002 09:09 AM



