Angel's LED Ring - GM Forum - Buick, Cadillac, Chev, Olds, GMC & Pontiac chat


Audio (and aftermarket electronics) This is your place for alarms, remote starters, to brag about your system, exaggerate your db levels, or simply ask questions for stock or aftermarket audio. No Flames! (except from roasted amps)

Reply
 
 
 
Thread Tools Search this Thread
Old 01-13-2007, 07:13 PM   #1
Senior Member
True Car Nut
Thread Starter
 
Join Date: Mar 2006
Location: Virginia
Posts: 2,904
Thanks: 0
Thanked 0 Times in 0 Posts
93-SSE is on a distinguished road
Default Angel'* LED Ring

OK, so i false connected everything and its gonna work with th button on the side of my GA Shifter, now to wire it...my two problems (that I currently know of...) are going to be the length of wire (i have that covered), and going through the fire wall...

so my question is where is the best place to go through from the engine compartment to the shifter


thanks in advance
~BOOZE
93-SSE is offline   Reply With Quote
Old 01-13-2007, 08:20 PM   #2
Senior Member
Certified Car Nut
 
Join Date: Oct 2003
Posts: 19,756
Thanks: 0
Thanked 0 Times in 0 Posts
1993 SLE is on a distinguished road
Default

drivers side, behind the strut....there is grommet where the Hood cable runs through
1993 SLE is offline   Reply With Quote
Old 01-14-2007, 09:51 AM   #3
Senior Member
True Car Nut
Thread Starter
 
Join Date: Mar 2006
Location: Virginia
Posts: 2,904
Thanks: 0
Thanked 0 Times in 0 Posts
93-SSE is on a distinguished road
Default

thank you Pat!
93-SSE is offline   Reply With Quote
Old 01-14-2007, 04:36 PM   #4
Senior Member
True Car Nut
Thread Starter
 
Join Date: Mar 2006
Location: Virginia
Posts: 2,904
Thanks: 0
Thanked 0 Times in 0 Posts
93-SSE is on a distinguished road
Default

mmk, not working...

i can't pinpoint where its going, and i found a place on the passenger side, behind the glove box behind the air bag but I cant get to it due to the airbag and the AC vents, the ac is mounted backwards and i dont think i could move it even when i unbolt it, and i just plain cant do the air bag...i can see where i want to go but i cant feed it through, and i went under the hood on the passenger side and i can see where thats going but the wires go into the goo looking stuff, thats is hardened, and im not sure what to do anymore...
93-SSE is offline   Reply With Quote
Old 01-14-2007, 05:45 PM   #5
Senior Member
Certified Car Nut
 
Join Date: Oct 2002
Posts: 11,307
Thanks: 0
Thanked 0 Times in 0 Posts
bonnie94ssei is on a distinguished road
Default

I did the driver'* side as well. It'* easier to find the hole when you're looking under the dash on the driver'* side up in that corner. Without looking in the car as I type, there'* a cable with a big rubber grommet that pulls out, and you have a nice big hole to work with.
bonnie94ssei is offline   Reply With Quote
Old 01-14-2007, 07:10 PM   #6
Senior Member
True Car Nut
Thread Starter
 
Join Date: Mar 2006
Location: Virginia
Posts: 2,904
Thanks: 0
Thanked 0 Times in 0 Posts
93-SSE is on a distinguished road
Default

well my problem on the drivers side was i couldn't find that spot under the dash, i can see it under the hood and i poked around with screw driver and couldn't see it, and i felt around too, i'll have another go tomorrow...
93-SSE is offline   Reply With Quote
Old 01-14-2007, 09:42 PM   #7
Senior Member
True Car Nut
 
Join Date: Feb 2006
Location: Melrose
Posts: 4,596
Thanks: 0
Thanked 0 Times in 0 Posts
BLACK94SSEi is on a distinguished road
Default

Quote:
Originally Posted by 93-SSE
well my problem on the drivers side was i couldn't find that spot under the dash, i can see it under the hood and i poked around with screw driver and couldn't see it, and i felt around too, i'll have another go tomorrow...
I used a wire hanger and taped the wire to it and made sure to tape up the sharp end as well and ran the wiring that way. It allowed it to push through all of the other wiring that was under the dash. If you do it just right, you wont have to drop any panels underneath and should be able to see the wiring attached to the hanger.
BLACK94SSEi is offline   Reply With Quote
Old 01-15-2007, 09:29 AM   #8
Senior Member
True Car Nut
Thread Starter
 
Join Date: Mar 2006
Location: Virginia
Posts: 2,904
Thanks: 0
Thanked 0 Times in 0 Posts
93-SSE is on a distinguished road
Default

yeah i was thinking about something like that before but i couldn't find the hole to do that with, search begins again in a few hours

thanks guys, i'll be posting again if i get stuck
93-SSE is offline   Reply With Quote
Old 01-15-2007, 09:58 PM   #9
Senior Member
True Car Nut
Thread Starter
 
Join Date: Mar 2006
Location: Virginia
Posts: 2,904
Thanks: 0
Thanked 0 Times in 0 Posts
93-SSE is on a distinguished road
Default

IM DONE!!!!

pictures coming soon, like tomorrow, in the your ride section
93-SSE is offline   Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
Angel Eyes LED help ptrfair Audio (and aftermarket electronics) 8 05-29-2007 02:31 PM
Angel Eye LED...dead? 93-SSE Audio (and aftermarket electronics) 22 03-17-2007 04:15 AM
Angel Eye LED Repairs... HELP Merlin 91/97 Audio (and aftermarket electronics) 5 11-10-2004 07:40 PM
Fuel Injector tips or caps that hold on the O ring???? Hal 1992-1999 2 06-04-2003 09:27 PM
Piston Ring Type DrJay 1992-1999 1 04-03-2003 01:08 PM


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -4. The time now is 08:54 AM.


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.