hey again

picked up the angel eyes. i saw a black and yellow wire attached to the LED. Which one of those to i connect to the parking lamp wire? or, do both get connected??

thanks for any help

Look at the schematic that comes with the angel eyes. Is the black not a ground wire? yellow is power? How many wires total come out of the light fixture?

there are 4 wires total. yellow and black for the led
white and black for the bulb. im out there now, its 7AM on the east coast.
its not as easy as i thought. my exsisting SS H3 bulb wont fit into the angel eyes socket. anyone know about that one??

and whats with the stock bracket not fitting at all? the screw holes dont line up? :?

you have to make your own bracket I was told that JOIST HANGERS are one of the best brackets to use, they're only like $2 and some change, you'll have to do a little fabrication though.

as far as the H3 there is a certain way you have to put them in, they have little rivets that have to be aligned. one should be a creasent type shape and the other should be more square like.

cool thanks

Both black are ground, and both plug into a single connector on the harness supplied by optilux. Maybe hack up or modify the harness they sent you to use.

yes, after 9 hrs this nightmare is complete.
i'll have pics later on tonight. with the story of how much fun i had putting these in hahaha

thanks for all the help

9hrs...

How about those pictures and updates?