Valve Cover Gasket Repalcement
No rush. Just let me know when your ready.
Good to know. Hopefully the learning curve isn't to steep, but it'* always good to have a few people who have been through it before.
Good to know. Hopefully the learning curve isn't to steep, but it'* always good to have a few people who have been through it before.
I have a little experience with general engine tuning so I should be good for most basic stuff. (MAF Tables, Shift Tables, Injector swaps and such)
Joined: May 2006
Posts: 29,661
Likes: 43
From: Sheboygan Wisconsin






How good do you want it tuned? If your looking for the best tune possible, then get a wide band. If you just looking at a basic tune, you can get by without it.
There is a tone of information about tuning with HPT, when you get to that point, we will get you started.
There is a tone of information about tuning with HPT, when you get to that point, we will get you started.
I've got my wide band set up to go in at the 3" down tube. The wide band are equipped with an on-off switch, so you won't be running it all the time - only when you're tuning.

I am thinking about the Aeroforce WBo2 kit. . .
Thread
Thread Starter
Forum
Replies
Last Post






