Im trying to replace the pump and pressure line. Attempted to remove the pressure line from the pump and in broke free not on the line but the at the hex fitting on the pump and I am unable to remove the assemble from the car at this point. Im not even sure of the best path to try to get it out.

Not sure I understand what happened. Did you brake the line? Or are you unsure how to remove the pump? To remove the pump you need to remove both lines. then remove the belt. Then turn the pulley so the hole is about noon, I believe it'* a 10mm deep socket, remove that bolt. Then turn the pulley so the hole is about 6 and remove that bolt. Pump comes right out.

Thanks I have it now. I had the pump unbolted but had to remove the coolant recovery reservoir in order to get it out of the engine bay. I do appreciate the support you provide. Jay

Good to hear. Ya, I forgot about that tank. It really cramps that side.