Call me stupid but how do i get the stock air intake off of the 2003 se so i can put a cai on there?? Well i figured it out but now what do i do about the pcm??

Intense sells a cradle for the Pcm....But I just cut down my old airbox down...it works

well worth it..

http://www.intense-racing.com/Mercha...tegory_Code=IE

how do i take the pcm out of the air box?

Basically, disconnect the batt neg., disconnect the IAT sensor, remove the air intake duct from tb & air cleaner housing, remove cover assembly from air cleaner housing. This should provide access to remove the PCM.

Inside the air box the pcm is held down with 2 tabs on either side.

I use the Intense PCM tray. Mounts best on an angle if you cut of the one side mounting bracket that extends out from the tray. I used self tap screws drilled through the bottom of the tray.