Help......
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Jul 2008
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Help......
2000 Bonne, Car was driving fine all day until I just got in it.. 1st it started sputtering, gave it a little gas and it slowly picked up... Got on the highway and it got up to 60mph, stated sputtering again then died... Pulled over, restarted it ran shitty, put it in gear it shut off.. Let it sit for a while restarted it ran fine... Got to the gas station did it again..SES light.
Im gettin fire, New plugs, wires, igniton module, all coils, MAP sensor, exhaust system w/ cat... Could it be fuel Injectors, regulator, pump... PLEASE HELP ME OUT!!!!
Just started a nu job need my baby fixed ASAP...
Im gettin fire, New plugs, wires, igniton module, all coils, MAP sensor, exhaust system w/ cat... Could it be fuel Injectors, regulator, pump... PLEASE HELP ME OUT!!!!
Just started a nu job need my baby fixed ASAP...
#2
Retired Senior Admin
Expert Gearhead
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
Please get the car scanned and post up the code. Sounds like a fuel pressure problem. Get that checked and post up what pressure you have. Could be a clogged fuel filter.
#4
DINOSAURUS BOOSTUS
Expert Gearhead
First thought was the same as Dan'*. Since he already posted it the pressure is on and I had to come up with more. In case you can't scan it because it'* not running to get to a free scan and everyone would charge you for one.
Unplug the MAF sensor (it controls fuel as well) in a pinch. Expect to need a little throttle and to have to keep the car running for a minute with the throttle. After that the pcm should learn it'* on the table and not the sensor.
Then toss in a fuel pressure test. this covers checking the pump which would show up as a lean bank code in a scan.
Between these two and or the scan, you should know pretty quickly how to get it back on the road again.
Unplug the MAF sensor (it controls fuel as well) in a pinch. Expect to need a little throttle and to have to keep the car running for a minute with the throttle. After that the pcm should learn it'* on the table and not the sensor.
Then toss in a fuel pressure test. this covers checking the pump which would show up as a lean bank code in a scan.
Between these two and or the scan, you should know pretty quickly how to get it back on the road again.
#5
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Jul 2008
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Thanx fellas..... I havent got the car scanned yet, Im trying to get it up to the school (Lincoln Tech) where I can scan it and fix it.... However I cranked it up, It runs but when I give it gas it idles down low likes its gonna die, then the rpm'* jumps up to 1500... Any more quick ideas b4 class guys????
Thread
Thread Starter
Forum
Replies
Last Post