Engine light and shaking
Senior Member
Posts like a Turbo
Joined: Sep 2006
Posts: 417
Likes: 0
From: Tampa, Florida, USA
BTW: When my MAF sensor was bad I went to several difference places and they could not detect a code...then again the SES light didn't come on until after I had the problem for several days. The code for the MAF is P102. But I think you might need a TECH II to pick it up.
Thread Starter
Senior Member
Posts like a Camaro
Joined: Dec 2002
Posts: 1,181
Likes: 0
From: Holly, Michigan
okay... thanks for the help all.
I feel stupid but it was the fuse box. When you first take it off it has that thing to discard. Held on by 3 screws. Well aparently I didn't tightin them back down when I loosend them, i didnt really think you had to I thought there only purpose was to hold that discard peice.....
But it was misfiring and threw injector codes because that damn thing wasnt tight....
I feel stupid but it was the fuse box. When you first take it off it has that thing to discard. Held on by 3 screws. Well aparently I didn't tightin them back down when I loosend them, i didnt really think you had to I thought there only purpose was to hold that discard peice.....
But it was misfiring and threw injector codes because that damn thing wasnt tight....
RIP
True Car Nut
Joined: Jul 2004
Posts: 5,656
Likes: 4
From: Grand Rapids, Mi
Actually, you don't have to remove the screws to get that "discard" cover off. It will just pop off over the screws. Even though (as I found out) the screws themselves are not at ground potentials, that is what holds that fuse box down and makes the ground connection for it. I'd imagine that it could cause various gremlins to appear.
Thread
Thread Starter
Forum
Replies
Last Post
lucille2
Cadillac
2
Feb 10, 2011 10:58 AM
MissRockstar04
2000-2005
9
Jul 7, 2009 04:12 PM