What is there and where does it go? vacuum line?
#1
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Jan 2007
Location: waterloo,ontario
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
What is there and where does it go? vacuum line?
Hey guys i have a CEL and its for the P0442 evap system leak i though maybe gas cap so i replaced it but the cel never went away. So today i take the engine cover off and find this
what is this and is that the spot it goes?
what is this and is that the spot it goes?
#4
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Jan 2007
Location: waterloo,ontario
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
what part needs to be replaced? because it had tape over it it was unhooked but i just pulled off the tape and found that the boot was cracked how should i go about fixing this?
#5
Senior Member
True Car Nut
Join Date: Jan 2005
Location: Montevideo, MN MWBF '05, '06, '07 WCBF '06 '07 survivor
Posts: 3,882
Likes: 0
Received 0 Likes
on
0 Posts
go to the auto parts store and get a piece of vacumn tubing and reconnect, so it looks like the one next to it.. maybe even replace the tubing on both of them
#6
DINOSAURUS BOOSTUS
Expert Gearhead
Most of the cars have a vacuum diagram on the radiator support and while it'* not the clearest, it should assist you in determining where a line should go if one were missing.
#7
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Jan 2007
Location: waterloo,ontario
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
lol i duck taped it for now but i will go to the store and get a new fitting and i did not know about the pic on the rad my cart has been oil sparyed to hell lol
#10
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Jan 2007
Location: waterloo,ontario
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
no but it needs it its cracked aswell right now the tape is just temp till i can get some time to go out and get the fittings