What size?
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: May 2007
Location: Dallas (Lewisville), TX
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
What size?
I am trying to take off the middle section of the vent system behind the ashtray closest to the floor. I don't seem to have the right size socket/wrench to get it off...
Does anyone know what size it is?
If you're wondering why I'm taking it off... there is something rolling around up there and it'* driving me CRAZY!!!
Does anyone know what size it is?
If you're wondering why I'm taking it off... there is something rolling around up there and it'* driving me CRAZY!!!
#2
DINOSAURUS BOOSTUS
Expert Gearhead
Can you be a little more specific as to what you are trying to remove. Most of the stuff in our cars is either a 7mm or 5.5mm for small hex head screws.
#3
Member
Posts like a V-Tak
Thread Starter
Join Date: May 2007
Location: Dallas (Lewisville), TX
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BillBoost37
Can you be a little more specific as to what you are trying to remove. Most of the stuff in our cars is either a 7mm or 5.5mm for small hex head screws.
Thread
Thread Starter
Forum
Replies
Last Post
Mark Peters
Performance, Brainstorming & Tuning
10
03-21-2003 08:42 PM