traction control light
Thread Starter
Junior Member
Posts like a Ricer Type-R
Joined: Apr 2005
Posts: 12
Likes: 0
From: Milwaukee

My traction control light use to come on with the abs light but it would go out if I turn the car off and on but now it comes on and stays on. I had all three hubs replaced but I might need some back brakes do you think that could be the problem?
It would help to know what year and model you have. Please put that in your signature.
For starters, it'* usually a WSS, so check your connections behind the hubs. The other most likely culprit is the PMV assembly underneath your airbox. It'* rarely the EBCM (computer) located on the firewall to the right of the gas pedal (inside the car).
You need to have the dealer scan it for faults.
For starters, it'* usually a WSS, so check your connections behind the hubs. The other most likely culprit is the PMV assembly underneath your airbox. It'* rarely the EBCM (computer) located on the firewall to the right of the gas pedal (inside the car).
You need to have the dealer scan it for faults.
sounds like wheel speed sensors? am i correct on this. a friend had a 96SSEi that this happened to and it was expensive fix but he went to the junkyard and got the parts and saved alot of money by doing it himself!!!!!
Originally Posted by 94SSEgold
sounds like wheel speed sensors? am i correct on this. a friend had a 96SSEi that this happened to and it was expensive fix but he went to the junkyard and got the parts and saved alot of money by doing it himself!!!!!
Thread
Thread Starter
Forum
Replies
Last Post






