Strut installation question
Thread Starter
Senior Member
Certified GM nut
Joined: Oct 2005
Posts: 1,942
Likes: 1
From: Western New York

JR - I was also thinking of reusing the factory nuts. When we do the other side tonight I’ll take some measurements so we know exactly how far the nut should go on.
Lash – We went with the Sensa-Tracs front & rear. We were going to use the reflex in the back but we’re already over budget. Advance gave us 10% off. New York State tax put 8% on. The total was $302. After the rebate it’ll work out to just over $60 per strut.
We really had no problem disassembling the strut assembly. You can tell there’* a lot of pressure on the spring compressors. We borrowed them from Advance & they worked great. If anyone is going to buy their own compressors I would highly recommend getting a quality set.
Lash – We went with the Sensa-Tracs front & rear. We were going to use the reflex in the back but we’re already over budget. Advance gave us 10% off. New York State tax put 8% on. The total was $302. After the rebate it’ll work out to just over $60 per strut.
We really had no problem disassembling the strut assembly. You can tell there’* a lot of pressure on the spring compressors. We borrowed them from Advance & they worked great. If anyone is going to buy their own compressors I would highly recommend getting a quality set.
Thread
Thread Starter
Forum
Replies
Last Post
putertopia
Performance, Brainstorming & Tuning
8
Aug 11, 2007 02:33 PM
crazyjoe
Audio (and aftermarket electronics)
13
May 21, 2006 04:18 PM



