send picture of motor please
Thread Starter
Senior Member
Posts like a 4 Banger
Joined: Feb 2007
Posts: 100
Likes: 10
From: Baltimore City, Maryland
send picture of motor please
can anybody send me a picture of a 97 sse or the same motor w/o the 3800 series II cover on so i can see where my spark plug wires go...thanks
Senior Member
Posts like a Corvette
Joined: Jan 2007
Posts: 1,451
Likes: 0
From: San Diego, CA
The front 3 wires (1-3-5) go into a plastic bracket clipped to the front end of the front valve cover, and come out where the green arrows point. Note: wire 1 should loop BEHIND the dipstick tube and wire 5 BEHIND the lifting eye bracket, or else they can be slack enough to get chopped by the fans.
The rear three wires (2-4-6) loop over the UIM, and are held in place by three "snap" brackets indicated by the red arrows, one on the EVAP bracket, one on the fuel rail, and one on the rear bracket that holds on the cover.
EDIT: I see other pix were posted while I was doing my response...
The rear three wires (2-4-6) loop over the UIM, and are held in place by three "snap" brackets indicated by the red arrows, one on the EVAP bracket, one on the fuel rail, and one on the rear bracket that holds on the cover.
EDIT: I see other pix were posted while I was doing my response...
Thread
Thread Starter
Forum
Replies
Last Post
