P0325 Service Code
Thread Starter
Junior Member
Posts like a Ricer Type-R
Joined: Aug 2004
Posts: 23
Likes: 0
P0325 Service Code
My Check Engine light has been coming on. Sometimes it takes the Traction Control with it. I had it read and it was .... P0325..... Advance didn't know exactly what to do. They wanted me to order a camshaft position sensor. I am not sure what to do. I want the light out now. Seems to be running fine.
1995 Bonneville 3800 145k
1995 Bonneville 3800 145k
Thread Starter
Junior Member
Posts like a Ricer Type-R
Joined: Aug 2004
Posts: 23
Likes: 0
I had it checked again today. I am now getting a P0361 code. The P0325 code is in the history and the P0361 is the current code. What should I do? I want to fix it myself and not pay the premium for dealership help.
Guest
Posts: n/a
We seem to be seeing a lot of issues with the 95 Bonnies doing this lately...
Either you have a bad ICM( Ignition Control Module ) bad PCM ( Powertrain Control Module )... You will also want to make sure all of the wires to the ICM and PCM are atached securely and that there has been no breaks in the wire at the ICM and PCM..
The P1361 is for the ICM not toggling... Could be the ICM not toggling or the PCM not taking over control... Hard to say...
The P0325 is for the Knock sensor circuit...
I was getting a P01361 on my 95 and I ended up replacing the PCM, Had too many driveability issues and the codes kept comming back...
Hard to say where the problem will be with you car... But these are a few places to look... Good Luck
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Either you have a bad ICM( Ignition Control Module ) bad PCM ( Powertrain Control Module )... You will also want to make sure all of the wires to the ICM and PCM are atached securely and that there has been no breaks in the wire at the ICM and PCM..
The P1361 is for the ICM not toggling... Could be the ICM not toggling or the PCM not taking over control... Hard to say...
The P0325 is for the Knock sensor circuit...
I was getting a P01361 on my 95 and I ended up replacing the PCM, Had too many driveability issues and the codes kept comming back...
Hard to say where the problem will be with you car... But these are a few places to look... Good Luck
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Thread
Thread Starter
Forum
Replies
Last Post
