P0325 ERROR (KNOCK SENSOR)
Thread Starter
Junior Member
Posts like a V-Tak
Joined: Aug 2004
Posts: 27
Likes: 0
From: HARRISBURG PA
P0325 ERROR (KNOCK SENSOR)
--------------------------------------------------------------------------------
I had my car scanned because the "check engine" light stays on. I finished swapping a 96 motor into my 95 SE. I replaced the front Knock sensor and the problem remains. I purchased another sensor to replace the rear sensor but I wanted to run this buy you guys before wasting 45 dollars on it and not have it fix my problem.
I check all the wiring to both sensors cleaned the connections, I also swapped the part that sits under the three coil packs (is that the ECM?) .... It keeps getting the P0325 error within 3 minutes after starting the car.
I need to get it fixed because it runs like crap with the timing retarded ... I just don't want to waist any more money buying sensors trying to fix the problem.
Please Help ... Thanks
_________________
1995 BONNEVILLE SE
211,000 MILES
NO MODS
I had my car scanned because the "check engine" light stays on. I finished swapping a 96 motor into my 95 SE. I replaced the front Knock sensor and the problem remains. I purchased another sensor to replace the rear sensor but I wanted to run this buy you guys before wasting 45 dollars on it and not have it fix my problem.
I check all the wiring to both sensors cleaned the connections, I also swapped the part that sits under the three coil packs (is that the ECM?) .... It keeps getting the P0325 error within 3 minutes after starting the car.
I need to get it fixed because it runs like crap with the timing retarded ... I just don't want to waist any more money buying sensors trying to fix the problem.
Please Help ... Thanks
_________________
1995 BONNEVILLE SE
211,000 MILES
NO MODS
Senior Member
Certified Car Nut
Joined: Mar 2003
Posts: 12,433
Likes: 2
Thread
Thread Starter
Forum
Replies
Last Post