1996 SE
My check engine light came on and tracting control turned off and wont turn on, so I took it to Auto Zone and they hooked it up and said it was Cyclinder 2 that was misfiring. They said it was prolly sprak plugs and wiring since it has 98k miles on it and i havent replaced it. So I replaced it and sure enough when I got to cylinder 2 it was wet with gasoline. I replaced the plugs and wires and the problem is still not fixed. Any ideas?

Either bad coil, or bad ICS system, i'm venturing the ICS because it'* only one misfire, and not 2 cylinders (normal with a bad coil) But a bad coil can produce 1 cyl misfire.

Move some coils around, and see if the misfire moves. If that doesn't change it, you'll need a new ICS module.

Price of coils?

THe ICS is what the coils bolt to.
Swap two coils and compare, if the mis moves with the coils its the coil. If its the same #2 cyl. then the ICS is suspect.

what is the price of a coil and how easy is it to replace

$35 for stock coil? $55 for MSD? Pull plug wires and remove two bolts to replace the coil.

Thanks for the help... It was the coil

Thanks for the call back.
You may want to replace all 3 coils as they must be the same age and will soon expire like the first?

definitely replace the other two coils mine was doing the same thing and i only replaced one and the other two eventually went out.