Keyless entry FOB problem - GM Forum - Buick, Cadillac, Chev, Olds, GMC & Pontiac chat


1992-1999 Series I L27 (1992-1994 SE,SLE, SSE) & Series II L36 (1995-1999 SE, SSE, SLE) and common problems for the Series I and II L67 (all supercharged models 92-99) Including Olds 88's, Olds LSS's and Buick Lesabres Please use General Chat for non-mechanical issues, and Performance and Brainstorming for improvements.

Reply
 
 
 
Thread Tools Search this Thread
Old 05-02-2007, 05:19 PM   #1
Junior Member
Posts like a Ricer Type-R
Thread Starter
 
Join Date: Apr 2007
Location: Lexington, Ky
Posts: 20
Thanks: 0
Thanked 0 Times in 0 Posts
Jeff Jacobs is on a distinguished road
Default Keyless entry FOB problem

I read the threads, and identified that I do have the correct codes number for my '99 to have keyless entry. I ordered a fob on ebay with free programming.(Car was bought with no FOB) Seems simple enough, connect (jump) the 4 and 8 pin together on the OBDII port, press some buttons and go! When I look at the port, I can't find metel pins in what I believe is the 4 and 8 port? Even if I was interpeting the 4 & 8 unside down there wouldn't be a metal clip in one or the other. Am I kidding myself to think they run in order? would anyone have a diagram or could tell me why I'm missing pins? thanks in advance.
Jeff Jacobs is offline   Reply With Quote
Old 05-02-2007, 05:34 PM   #2
DINOSAURUS BOOSTUS

Expert Gearhead
 
BillBoost37's Avatar
 
Join Date: Mar 2005
Location: Enfield, CT
Posts: 41,391
Thanks: 0
Thanked 0 Times in 0 Posts
BillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of light
Default

Here is a pic of the pin outs. Should help out. Let us know if we can help further.
Name:  DLC.gif
Views: 10
Size:  6.0 KB
BillBoost37 is offline   Reply With Quote
Old 05-03-2007, 06:34 PM   #3
Junior Member
Posts like a Ricer Type-R
Thread Starter
 
Join Date: Apr 2007
Location: Lexington, Ky
Posts: 20
Thanks: 0
Thanked 0 Times in 0 Posts
Jeff Jacobs is on a distinguished road
Default Nothing

ok, identified 4 & 8, used a simple wire to jump 9used paper clip then bread tie)...nothing, no unlock or lock of doors-check pins they are connected and appear fine. Used the black and black white as describe in earlier thread. thanks
Jeff Jacobs is offline   Reply With Quote
Old 05-03-2007, 07:31 PM   #4
Member
Posts like a V-Tak
 
Join Date: Feb 2007
Location: Chicago
Posts: 99
Thanks: 0
Thanked 0 Times in 0 Posts
bandit01 is on a distinguished road
Default Re: Nothing

Quote:
Originally Posted by Jeff Jacobs
ok, identified 4 & 8, used a simple wire to jump 9used paper clip then bread tie)...nothing, no unlock or lock of doors-check pins they are connected and appear fine. Used the black and black white as describe in earlier thread. thanks
I just bought one and mine programmed fine. I used a piece of wire to jump the two. You have to turn the key forward (not start) then the locks should pop and in a few more seconds they should pop again. At this point you hold down the lock and unlock buttons at the same time and that should do it.
bandit01 is offline   Reply With Quote
Old 05-03-2007, 11:43 PM   #5
Junior Member
Posts like a Ricer Type-R
 
Join Date: Aug 2002
Posts: 10
Thanks: 0
Thanked 0 Times in 0 Posts
willwren is on a distinguished road
Default

Please give us the FCC ID off the FOB that wouldn't program so we can see if you got the right one.
willwren is offline   Reply With Quote
Old 05-04-2007, 09:53 AM   #6
Junior Member
Posts like a Ricer Type-R
Thread Starter
 
Join Date: Apr 2007
Location: Lexington, Ky
Posts: 20
Thanks: 0
Thanked 0 Times in 0 Posts
Jeff Jacobs is on a distinguished road
Default

AHH, the instuctions I received DID NOT have correct order the sequence of when to turn the key on!! It made it sound like the doors would lock and unlock with only the jumper in place. Followed your instuctions and wha-la. It works...GM dealer quoted $45 to do this...And the've qouted me $900 for the UIM and LIM replacement WHAT A JOKE! Thanks for the time.
Jeff Jacobs is offline   Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
Programming a keyless entry fob for 1992 SSE Whostens Everything Electrical & Electronic 2 12-14-2007 10:00 PM
Did 91 SSE Have keyless entry? Having alarm issues. No Fob MAKAVELI Everything Electrical & Electronic 4 11-25-2007 11:29 PM
Programming Keyless Entry FOB on a 1993 Bonneville SSE..help sickofthinking 1992-1999 4 01-25-2005 05:26 PM
Wow...anyone needing a new keyless entry fob, read this Hailey General GM Chat 7 03-16-2004 01:32 PM
Need Help Buying a Keyless Entry Key Fob. parallelcircuits Audio (and aftermarket electronics) 7 08-25-2003 11:56 AM


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -4. The time now is 03:15 PM.


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.