how do I install a push button starter?
Thread Starter
Member
Posts like a V-Tak
Joined: Feb 2008
Posts: 67
Likes: 0
From: superior wi,
how do I install a push button starter?
Ok so i bought this push button starter http://www.thehoffmangroup.com/keepi...ushbuttonstart
But I'm not sure wich wires to tap into under the dash to make this work
And I don't want it to work with out the key in the ignition.
So could someone tell me wich wires do what and what color they are?
But I'm not sure wich wires to tap into under the dash to make this work
And I don't want it to work with out the key in the ignition.
So could someone tell me wich wires do what and what color they are?
BANNED
Joined: Mar 2004
Posts: 0
Likes: 5
From: Purgatory
Bonnememn did it in his 93 SE
read this: http://www.bonnevilleclub.com/forum/...ic.php?t=16818
AND then this, important: http://www.bonnevilleclub.com/forum/...ic.php?t=18218
read this: http://www.bonnevilleclub.com/forum/...ic.php?t=16818
AND then this, important: http://www.bonnevilleclub.com/forum/...ic.php?t=18218
Senior Member
True Car Nut
Joined: Mar 2004
Posts: 3,066
Likes: 10
From: Ames, Iowa
If you cannot readily locate a reasonably priced factory service manual for your '94, consider purchasing an alldata subscription for your car. http://www.alldatadiy.com From that, you can download and print the wiring diagrams you will need to do this job. To get an idea of what the starting circuit looks like in a '95 (maybe not the same as yours in many ways):
Thread
Thread Starter
Forum
Replies
Last Post
stairstepper1
Performance, Brainstorming & Tuning
17
Dec 22, 2009 01:26 AM