FL Wheel Bearing replacement ?
Senior Member
Posts like a 4 Banger
Joined: Mar 2006
Posts: 104
Likes: 0
From: Cottage Grove, Minnesota
I'm sorry, I can see how my statement is confusing.
The best was I can describe the sound would be if you held an aerosol can in your hand and shook it so the ball would trace the inside of the can... not so much a rattle as a controlled spin
Best Location guess would be just right of the front left wheel, couldn't be more then a foot away at worst. I just went outside now to try to locate exactly where the sound was, but I couldn't get anything outta it, I need to drive a bit first. The car still feels smooth, there isn't a vibration that has been noticeable, just the noise, and my ABS light.
The noise only comes when I accelerate the car, it'll quiet down as soon as I release the gas. Doesn't matter what the RPM'* are at, it happens at the slightest touch.
The best was I can describe the sound would be if you held an aerosol can in your hand and shook it so the ball would trace the inside of the can... not so much a rattle as a controlled spin
Best Location guess would be just right of the front left wheel, couldn't be more then a foot away at worst. I just went outside now to try to locate exactly where the sound was, but I couldn't get anything outta it, I need to drive a bit first. The car still feels smooth, there isn't a vibration that has been noticeable, just the noise, and my ABS light.
The noise only comes when I accelerate the car, it'll quiet down as soon as I release the gas. Doesn't matter what the RPM'* are at, it happens at the slightest touch.
Senior Member
True Car Nut
Joined: Feb 2005
Posts: 3,014
Likes: 0
From: Brampton, Ontario
Originally Posted by Maymybonneliveforever
I need to find a good used or new torque wrench in 1/2 " drive that is in ft lbs. I see the digital snap-on ones but I need to sell something in order to afford it and my first born doesn't want to leave the house. I think the click type work great.....Can I post this request in the For Sale Section?....
But first I need to count my spare coin, then convert it to U.*. ......heck, I've got $12.45 U.*. saved up.
But first I need to count my spare coin, then convert it to U.*. ......heck, I've got $12.45 U.*. saved up.
I'm sure if you look hard enough you'll find spelling errors. Next time I can add one just to help you identify.Frank, that'* trying to get a 95 on the road.
Senior Member
Posts like a 4 Banger
Joined: Mar 2006
Posts: 104
Likes: 0
From: Cottage Grove, Minnesota
Bill, i'm willing to bet there are quite a few people down here in Arizona, I run into a bonneville every couple miles down here 
I don't know if it'* the wheel anymore though, I had a neighbor help me out, and I think the sound is coming from under the drivers side somewhere, i'm gonna look around a little more, then if I can't find it, I might just have to start a new post
I don't know if it'* the wheel anymore though, I had a neighbor help me out, and I think the sound is coming from under the drivers side somewhere, i'm gonna look around a little more, then if I can't find it, I might just have to start a new post
Thread
Thread Starter
Forum
Replies
Last Post
