what type of scann toll are you using.

THAT is the question of the day. We need manufacturer and model number.

Actron 9110 with the CP9111 cartridge and a CP9115 patch cable is what i have exactly how i was told on here

Ok, well it seems you have the correct scantool/cable combo. I suggest you should pull your cluster, and check to see if the bulb is blown. If it isn't blown, and the CEL doesn't come on when the key is turned on, it'* most likely a bad PCM. It seems the 94/95s are starting to experience failing PCMs now with the cars aging.

im kind of leanin to the pcm. i got the car for 600$ at the auction so far a used supercharger and a maf and possibly a pcm now i know why they got rid of it. other than that the car is in good shape. oh and i have a re-mand pcm i dunno if that will help me any. i found that out when i first thought it was my pcm and pulled it out. i saw that it was re-mand and thought "this cant be bad its from ac delco" i think i was wrong

94-95 were the worst pcm years for failure rate. it'* probably worth trying another if someone is local or etc etc .

ok its NOT the PCM. my connector on the car and the one on the scan tool the connectors dont look like there are in the right slots. im so lost. car doesnt run long. scantool wont read. car when it does run it runs like $h.. any one wanna buy a parts car lol j/k ok some one give me a list of things to check please and i will go out and check everything i can.

no at first it would restart after about 10 min now i have to leave it off for a couple hours then it will start. and its not running as long either. i could go to the store and come back and it would work till i got around my house but now it wont even make it to the store.