3800 III manifold pictures here
#1
Senior Member
Posts like a Turbo
Thread Starter
Join Date: May 2003
Location: B'ham.AL
Posts: 435
Likes: 0
Received 0 Likes
on
0 Posts
3800 III manifold pictures here
TimberWarp over at ClubGP is the first to have pictures.
http://www.clubgp.com/newforum/tm.as...mode=1&smode=1
http://www.clubgp.com/newforum/tm.as...mode=1&smode=1
#5
Senior Member
Posts like a Turbo
Thread Starter
Join Date: May 2003
Location: B'ham.AL
Posts: 435
Likes: 0
Received 0 Likes
on
0 Posts
Link
Here is another link talking about welding the coolant ports closed on the lower manifold.
http://www.clubgp.com/newforum/tm.as...mode=1&smode=1
http://www.clubgp.com/newforum/tm.as...mode=1&smode=1
#6
Senior Member
Posts like a Turbo
Join Date: Apr 2004
Location: Sheridan Wyoming
Posts: 210
Likes: 0
Received 0 Likes
on
0 Posts
hmmmmm,,, very interesting !!! SURELY we all will soon find out what all is involved with changing over to the aluminum on the '95-03.
Is it possible that the only issue on the change-over will be the throttle body?
AND, if so, hopefully the "throttle body adapter" that was mentioned will solve that.
Gosh, by studying the pictures, it makes me think that the maybe the aluminum is very nearly a "bolt-on replacement."
That would be T O O C O O L !!
BE SURE TO LET US KNOW
Is it possible that the only issue on the change-over will be the throttle body?
AND, if so, hopefully the "throttle body adapter" that was mentioned will solve that.
Gosh, by studying the pictures, it makes me think that the maybe the aluminum is very nearly a "bolt-on replacement."
That would be T O O C O O L !!
BE SURE TO LET US KNOW
Thread
Thread Starter
Forum
Replies
Last Post