The top of my LIM is full of oil again because this STUPID PCV tube that goes to the valve over is leaking oil. It needs a gasket, but for some reason no one seems to know what it needs! IT is very insecurely sitting in there right now. I had my engine basically spotless so that i could see if i could find any leaks or anything, and yeah...i found it. Here are some pics I took about 15 mins ago.

:( does this mean no drivey to Indiana??

Clean it and put some RTV around it. 'Tis what I would do if I couldn't find a gasket.

Ok...RTV, not very familiar with RTV.

And hah, I don't think this affects anything Les. Its just a minor annoyance thats making my spotless engine dirty.

its just an adhesive silicon sealant, there are MANY varieties though

Room
Temperature
Vulcanizing

Vulcanizing is the process of increasing the strength and resilience of rubber by adding heat, pressure, and chemicals such as sulfur. A compound treated by vulcanization tends to form a strong bond.

Aren't these grommets available from the aftermarket?

Thats alot of oil, are you sure your pcv valve is working properly or something.(Im not sure how itt works) but I ve had 2 bonnys where that tube was lose and no oil like that came out.

If you narrowed it down to a grommet, Advance has a help isle with a large variety for our cars sometimes kept near the filters. Also it couldn't be much at a stealership.

Ah, good idea, i have yet to try the stealership. I will run down there tomorrow or w/e they're open.

And umm, I am not sure if that is good or not, but i do alot of WOT, i'm betting thats somehow apart of it.