Ipod connected thru xm
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Jun 2008
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Ipod connected thru xm
I'm running into the same problems a lot of users on here are with hooking up my ipod through the stock system. That being that i dont have a wiring harness for a cd changer in my trunk.
My question for those of you with much better tech knowledge than myself is if i would be able to run it into the system through my xm tuner. I don't use the xm, and never plan to, so wouldn't it stand to reason that all the wires i would need to splice into would be present in that wiring harness? i dont think i would be difficult finding a connector and making a custom harness for it.
So if this is possible does anyone have access to a wiring diagram which could help me determine which wire is what, so i can try to make this happen?
My question for those of you with much better tech knowledge than myself is if i would be able to run it into the system through my xm tuner. I don't use the xm, and never plan to, so wouldn't it stand to reason that all the wires i would need to splice into would be present in that wiring harness? i dont think i would be difficult finding a connector and making a custom harness for it.
So if this is possible does anyone have access to a wiring diagram which could help me determine which wire is what, so i can try to make this happen?
#2
Senior Member
Posts like a Turbo
Join Date: Dec 2006
Location: Cincinnati, Ohio
Posts: 484
Likes: 0
Received 0 Likes
on
0 Posts
yes you can pac offers "auxillery input adaptors" that will work for your case perfectly. Also, if your xm was displayed on your radios display, your ipod will too. the part number is gm something or other. Look it up on pacs website and then look online for better prices.
#3
Member
Posts like a V-Tak
Thread Starter
Join Date: Jun 2008
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
the pheriphreal unit i have is listed as an aux input adapter. i have the pdxp and the gm2 harness but their tech guy is telling me that its only made for the cd changer connection and if not im *.o.l.
does anyone have an idea on how to make this work?
does anyone have an idea on how to make this work?
#5
Member
Posts like a V-Tak
Thread Starter
Join Date: Jun 2008
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
i found the pin out for the xm in an old post here
https://www.gmforum.com/t275273-2/
so thats a start, now if i could just find a pin out on the elusive cd changer harness
https://www.gmforum.com/t275273-2/
so thats a start, now if i could just find a pin out on the elusive cd changer harness
Thread
Thread Starter
Forum
Replies
Last Post
justnw
Performance, Brainstorming & Tuning
16
01-24-2013 05:38 PM
jdsonic
1992-1999
6
04-22-2009 10:49 PM
96AZSSEi
Audio (and aftermarket electronics)
2
07-21-2003 11:34 PM