UIM / LIM gasket part #s
#1
Junior Member
Thread Starter
Join Date: May 2008
Location: Rhode Island
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
UIM / LIM gasket part #*
I have a 2003 L36 and need to replace the UIM and LIM gaskets. I have the follwing part #*.
LIM Gm # 89017816
coolant elbows GM #24503423
UIM GM #89017554
My question is I also see the following part #* list for this
1711317 and 89017279 . I don't know what these are.
Which ones should I get ? I know everyone said to get GM parts
Appreciate yor help
LIM Gm # 89017816
coolant elbows GM #24503423
UIM GM #89017554
My question is I also see the following part #* list for this
1711317 and 89017279 . I don't know what these are.
Which ones should I get ? I know everyone said to get GM parts
Appreciate yor help
#2
Senior Member
True Car Nut
Join Date: Jun 2003
Location: Purgatory
Posts: 6,313
Likes: 0
Received 0 Likes
on
0 Posts
http://www.intense-racing.com/Mercha...tegory_Code=GH
They have a special on shipping, only $8.94 flat rate.
upper-$49
lower$28
elbows $10each
Good deal.
They have a special on shipping, only $8.94 flat rate.
upper-$49
lower$28
elbows $10each
Good deal.
#3
Senior Member
Certified GM nut
Join Date: Oct 2005
Location: Western New York
Posts: 1,942
Likes: 0
Received 0 Likes
on
0 Posts
Where did you get those 2 part numbers? GM seems to use 8 digit numbers so 1711317 may be a typo. A google search shows 89017279 as the lower intake for the 3.1 & 3.4'*.
You might want change the valve cover gaskets while you're at it. Some of us also get the throttle body gasket & give the throttle body a good cleaning. Fuel injector O rings are generally replaced but I'm not sure if I'd worry about it on a 2003.
You might want change the valve cover gaskets while you're at it. Some of us also get the throttle body gasket & give the throttle body a good cleaning. Fuel injector O rings are generally replaced but I'm not sure if I'd worry about it on a 2003.
#4
Junior Member
Thread Starter
Join Date: May 2008
Location: Rhode Island
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the info , sorry it'* been a while but the computer has been down.The 317 # was a typo and that # is now the 554#. will check out Intense Racing. I have 115k miles so I'm going to do the O rings and everything.
Thanks Again
Thanks Again
Thread
Thread Starter
Forum
Replies
Last Post
Paul1981
2000-2005
10
12-21-2007 10:05 PM
Dave535i
1992-1999
6
07-09-2007 10:28 AM
singscountry1967
2000-2005
11
01-29-2007 05:07 AM