GM Forum - Buick, Cadillac, Olds, GMC & Pontiac chat

GM Forum - Buick, Cadillac, Olds, GMC & Pontiac chat (https://www.gmforum.com/)
-   2000-2005 (https://www.gmforum.com/2000-2005-90/)
-   -   UIM / LIM gasket part #s (https://www.gmforum.com/2000-2005-90/uim-lim-gasket-part-s-276103/)

vette65 05-05-2008 07:57 AM

UIM / LIM gasket part #s
 
I have a 2003 L36 and need to replace the UIM and LIM gaskets. I have the follwing part #s.

LIM Gm # 89017816
coolant elbows GM #24503423
UIM GM #89017554

My question is I also see the following part #s list for this
1711317 and 89017279 . I don't know what these are.

Which ones should I get ? I know everyone said to get GM parts

Appreciate yor help

PontiacDad 05-05-2008 09:27 AM

http://www.intense-racing.com/Mercha...tegory_Code=GH

They have a special on shipping, only $8.94 flat rate.
upper-$49
lower$28
elbows $10each

Good deal.

Technical Ted 05-05-2008 10:43 AM

Where did you get those 2 part numbers? GM seems to use 8 digit numbers so 1711317 may be a typo. A google search shows 89017279 as the lower intake for the 3.1 & 3.4's.

You might want change the valve cover gaskets while you're at it. Some of us also get the throttle body gasket & give the throttle body a good cleaning. Fuel injector O rings are generally replaced but I'm not sure if I'd worry about it on a 2003.

vette65 05-11-2008 01:07 PM

Thanks for the info , sorry it's been a while but the computer has been down.The 317 # was a typo and that # is now the 554#. will check out Intense Racing. I have 115k miles so I'm going to do the O rings and everything.

Thanks Again


All times are GMT -4. The time now is 03:52 PM.


© 2024 MH Sub I, LLC dba Internet Brands