A/C Problem
#1
Junior Member
Thread Starter
Join Date: Jul 2007
Location: Pa
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
A/C Problem
I was trying to charge my A/C system the other day and am now having a problem. It was originally just low so the compressor would kick on and off. After putting some refrigerent in it, the compressor has now stopped kicking in all together. I tried putting a jumper in the plug for the evaperator, switching relays, and I have checked all the fuses. I also scanned it with and Autoxray scanner and there are no codes but when I looked at the real time data it says the A/C is disabled. Any idea what to look for? It'* a 1993 SE. Thank you.
#5
Junior Member
Thread Starter
Join Date: Jul 2007
Location: Pa
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
No, unless my gauge was wrong. I didn't get a chance to put much into it when the compressor stopped so it still should be pretty low. Is there a way to check if its disabled by a switch?
#6
DINOSAURUS BOOSTUS
Expert Gearhead
A Tech 2 scanner would tell you what the switches are reading. Other than that..I think you could probably test with parameters from the FSM. It probably tells you what the ohm readings for a switch are.
Thread
Thread Starter
Forum
Replies
Last Post
Peterg22000
1992-1999
23
04-22-2006 07:50 PM