read before look at pics - (huge 56k warning)
Senior Member
True Car Nut
Joined: Dec 2002
Posts: 5,857
Likes: 0
From: Halifax, Canada 91SSE / 97SSEi
Originally Posted by zzzzzeke
you will probably notice the biggest difference with a claybar on the lower rocker panels......but you also be suprised of all the airborne contaminants that it removes from the hood, roof, trunk, doors, etc.........
clay bar = necessity
clay bar = necessity
Have you personally used Zaino? zzzzeke
Member
Posts like a V-Tak
Joined: Aug 2003
Posts: 91
Likes: 0
From: Patterson ,California
You need to use meguires #3 with their foam buffing pad and a electric buffer to remove those scrathes and water spots.Autobody supply shopshave everything you need. Also try their #7 hand glaze,it works great on black.
Member
Posts like a V-Tak
Joined: Aug 2003
Posts: 91
Likes: 0
From: Patterson ,California
You need to use meguires #3 with their foam buffing pad and a electric buffer to remove those scrathes and water spots.Autobody supply shopshave everything you need. Also try their #7 hand glaze,it works great on black.
Senior Member
Certified GM nut
Joined: Sep 2002
Posts: 1,728
Likes: 1
From: Eden Prairie, MN
i think he'd be better off going for the #2 fine cut cleaner, and if that isn't enough, going to the #1 medium cut cleaner. a subsitute for the #7 could be the #81, which is easier to work with, with very similar results.
Senior Member
True Car Nut
Joined: Aug 2003
Posts: 5,246
Likes: 3
From: Salina, KS
Originally Posted by zzzzzeke
i think he'd be better off going for the #2 fine cut cleaner, and if that isn't enough, going to the #1 medium cut cleaner. a subsitute for the #7 could be the #81, which is easier to work with, with very similar results.
Or you could go with the #451 of the coarse cut cleaner and then double-back to the #66 of the slicer-dicer to swirl away the glare issues.
I know this. 'Cause I have a B.*. in Linguistics.
Okay, carry on with your regularly scheduled program!!
Thread
Thread Starter
Forum
Replies
Last Post
DarkShadow
Lounge
20
May 10, 2006 06:13 PM
