Projector Retrofit Done update cutoff pics
#1
Senior Member
Certified Car Nut
Thread Starter
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
Projector Retrofit Done update cutoff pics
ok so i FINALLY have this done, i worked all day getting them fit and modded to the headlight housings, I have previously prototyped one right hand side light, but not did another right and left.
Details, GM/Blazer projectors from a 98ish Cadillac STS
the pics should explain it all
Caddy lights
Bonneville headlights that i used.
taking them apart
lense off
lense off, filler off
reflector off
The projectors that are being used
Let the modding begin
I still have to build a shield that will hide the projector housing, but this will give you an idea
Both of them
I will have some on the car shots prolly tomarrow and i have to aim them and then get the shield built. But its in the home stretch
Details, GM/Blazer projectors from a 98ish Cadillac STS
the pics should explain it all
Caddy lights
Bonneville headlights that i used.
taking them apart
lense off
lense off, filler off
reflector off
The projectors that are being used
Let the modding begin
I still have to build a shield that will hide the projector housing, but this will give you an idea
Both of them
I will have some on the car shots prolly tomarrow and i have to aim them and then get the shield built. But its in the home stretch
#4
Administratus Emeritus
Certified Car Nut
Pat, you never cease to amaze me with your intents and resolve to carry them out. Once again, an awesome mod and looks G*R*R*R*E*A*T* (Tony the Tiger style) Some of these Really need to go into the HowTo Section Bud.
#5
Senior Member
Posts like a Corvette
Join Date: Jun 2008
Location: Cleveland, OH
Posts: 1,389
Likes: 0
Received 0 Likes
on
0 Posts
damn lookin nice Pat, I have always wanted to do a projector retrofit with some spare housings I have, I don't know if you have any ideas for a shroud but what one of my buddys did for a Regal was take some plexiglass and cut a circle in the center then slowly get it to the shape of the reflector to make it flat, came out really nice
#7
Senior Member
Certified Car Nut
Thread Starter
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
damn lookin nice Pat, I have always wanted to do a projector retrofit with some spare housings I have, I don't know if you have any ideas for a shroud but what one of my buddys did for a Regal was take some plexiglass and cut a circle in the center then slowly get it to the shape of the reflector to make it flat, came out really nice