they didnt come out the best...

Is that using the rice pipe? Looks good.

not the rice pipe, but made by a ricer company called matrix the coupler is matrix too...

You have the same problem I have. The pipe gets REALLY close to the air pump. One other thing you can do to help out alot is to build a box between the filter and the engine. This will help drop intake tempatures trmenously and allow better performance.

On a side note: If you build a box for it, you can easily relocate the horn to give you more room. There is one bolt holding the horn in place. There is an identical mounting point about 8" towards the rear of the car from that spot that you can move the horn to. Harnesses reach it just fine. I did it myself and it only takes about 1 minute to do.

already moved the horn gordy but i think im gonna go for a bwi(bumper well intake)

Looks good! Where is the PCM on a 95?

Under the dash.

That'* where maufacuturers should put all computer components, under the dash. Doesn't make sense to me why they sometimes put PCMs in the engine compartment. You'd think they'd realize that under the hood it can basically get destoyed from either weather or even a slight accident, depending on where they put it. Coming through the firewall (like my SHO'* was) or somewhere inside the cabin is better place in my opinion.