Intake pics
#4
You have the same problem I have. The pipe gets REALLY close to the air pump. One other thing you can do to help out alot is to build a box between the filter and the engine. This will help drop intake tempatures trmenously and allow better performance.
On a side note: If you build a box for it, you can easily relocate the horn to give you more room. There is one bolt holding the horn in place. There is an identical mounting point about 8" towards the rear of the car from that spot that you can move the horn to. Harnesses reach it just fine. I did it myself and it only takes about 1 minute to do.
On a side note: If you build a box for it, you can easily relocate the horn to give you more room. There is one bolt holding the horn in place. There is an identical mounting point about 8" towards the rear of the car from that spot that you can move the horn to. Harnesses reach it just fine. I did it myself and it only takes about 1 minute to do.
#8
Senior Member
Posts like a Turbo
Join Date: Jul 2004
Posts: 226
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SSEi95
Originally Posted by Twister97
Looks good! Where is the PCM on a 95?
Thread
Thread Starter
Forum
Replies
Last Post
markviiisvt4
Performance, Brainstorming & Tuning
10
01-03-2006 11:46 AM