Heat Shieldfor the CAI
Thread Starter
Senior Member
Certified GM nut
Joined: Sep 2005
Posts: 2,009
Likes: 0
From: Home Sweet Home in New York
Heat Shieldfor the CAI
So, I finally got around to building my heat shield. I want to thank Pat (1993_SLE) and Bill (Willren) for the ideas I stol...borrowed to build this:
The shield was built right around the filter and the pipe runs into it. The IAT recepticle runs through the shield and the sensor plugs in on the outside. I used lexan plastic and reflectix heat reflecting material.
The best part is that the shield acts as a solid support for the whole box.
The shield was built right around the filter and the pipe runs into it. The IAT recepticle runs through the shield and the sensor plugs in on the outside. I used lexan plastic and reflectix heat reflecting material.
The best part is that the shield acts as a solid support for the whole box.
Senior Member
True Car Nut
Joined: May 2003
Posts: 8,135
Likes: 1
From: Lethbridge, Alberta, _______Canada._______ West Coast Bonneville Fest ___05,06,07 Survivor___
VERY good Idea, that looks awesome!
I would be willing to bet, that will block alot of unwanted heat
Nice work.
I would be willing to bet, that will block alot of unwanted heat
Nice work.
Thread Starter
Senior Member
Certified GM nut
Joined: Sep 2005
Posts: 2,009
Likes: 0
From: Home Sweet Home in New York
Originally Posted by BillBoost37
Looks good...
Is that a "spare" clamp laying on the rad support?
Is that a "spare" clamp laying on the rad support?
Thread
Thread Starter
Forum
Replies
Last Post
tumbleweed
Performance, Brainstorming & Tuning
9
Nov 26, 2005 11:50 PM
19bonne93
Performance, Brainstorming & Tuning
20
Dec 2, 2004 12:10 AM
