If you are new to what i have done, you might want to check out this thread:
http://www.bonnevilleclub.com/forum/...ic.php?t=35901

For those people who have seen that thread:
Here is the finished product of the boxes and amp and wiring relocation.
This is the first box, after being carpeted.




Here is where I sat the covered box next to the other uncovered one, with the amp still temp. wired.

Here is the second box.



This is with both covered boxes in the car, with the amp still temp. wired.





Here, is the final install. Some of these pics turned out blury. I mounted the amp above the left box, like 1993SLE and a few others have done. I then hid the wiring behind the plastic part there.








This is the completed mod/upgrade/install. I welcome your comments. I also added a second in-line fuse to the positive amp wire today, because I had put mine in my trunk, when I learned you need one less than a foot from the battery. Hope you enjoy the pics!

thanks!

awsome!!!

the only thing that concerns me is this


it looks like the wire is just comming out the back of the box and it is not sealed. You need to seal that.

I know...I still need to silicone that. I wanted to install the stuff, to make sure it all worked. There really isnt much space between that gromet. I have disconnects in the box, so If i silicone it, it wont matter if i have to remove the sub.

-thanks for the comment too

Nice and clean install!

it looking better. what brand are those subs?

that looks great, and where the amp is mouted makes it nice and clean

pepboys....lmao....they are really cheap...$40.00. They do the job for me though. They really sound better in the new boxes too, since the box is the right specs for each speaker.