i want to know whis anyone has a tinted tails that look this darn good (I impressed even myself)

Pic is kinda bad because my camera had been droped to many times at the time of this pic (since been fixed) and it doesnt focus that well when in that close :(

BTW im board as hell tonight can you tell?

EDIT: found another pic!

I think driverjohn'* might come pretty close to matching or beating those. They're pretty impressive. Yours are too. Very good if you haven't done any polishing after clear coat.

Make sure you get some good HARD wax like liquid glass on them to protect them.

EK98'* are about 80% of that gloss, but only because we had poor temperatures for tinting/clearcoating. With a little buffing in the spring, we'll have them there.

Take your time. Get some 1500 grit, and try to polish them even more.

thats 100% unpolished.
i used over reduced basecoat(WA8555 ) and 3 coats of Clear!

What clear are you using? As far as rattle-cans go, I've found Duplicolor'* clear gloss to be the best, but found it flows and levels better colder than the reccomended temps.

LOL, I love starting a trend

Great job! Props to you! Mine would be quite comparable. Get some pics up once you install them!

http://www.basfrefinish.com/vta/R-M/DC92.htm

Peter, you must be using a good quality spray gun. The pics quality that I can see is not good enough to discern the fine details but it looks very reflective.

Thanks Paul

this is the gun used
http://www.autorefinishdevilbiss.com/main.php?p=g&id=1
http://www2.shopping.com/xPO-Devilbi...Feed_Spray_Gun

Oh darn, my compressor only produces 7.8 scfm at 40 psi and I see that gun needs 9 to 11 scfm. :(

Paul, he works at a paint and body shop.

Expect the best.