KR/boost video
Thread Starter
Senior Member
Posts like a Turbo
Joined: Feb 2004
Posts: 231
Likes: 0
From: Wappingers Falls, NY

Since I put in my AeroForce, I was wondering if the KR is normal for my mods. The first video is wide open throttle, the boost topped at 11.3 psi and a 2.4 KR reading. The second video is 75% throtlle and I got higher KR readings with lower boost. Are these KR readings normal? Thanks.......
http://media.putfile.com/kr-and-boost-1
http://media.putfile.com/kr-and-boost-2
http://media.putfile.com/kr-and-boost-1
http://media.putfile.com/kr-and-boost-2
You might wanna open up the exhaust a bit more to help get rid of the KR. 2.4 KR isn't terrible, and KR does happen in even stock cars.
Add some higher octane fuel to the motor, and if it goes away, you will know it is not false knock.
Add some higher octane fuel to the motor, and if it goes away, you will know it is not false knock.
Thread Starter
Senior Member
Posts like a Turbo
Joined: Feb 2004
Posts: 231
Likes: 0
From: Wappingers Falls, NY

Originally Posted by Sol
You might wanna open up the exhaust a bit more to help get rid of the KR. 2.4 KR isn't terrible, and KR does happen in even stock cars.
Add some higher octane fuel to the motor, and if it goes away, you will know it is not false knock.
Add some higher octane fuel to the motor, and if it goes away, you will know it is not false knock.
Thread Starter
Senior Member
Posts like a Turbo
Joined: Feb 2004
Posts: 231
Likes: 0
From: Wappingers Falls, NY

I'll be ordering a Magnaflow cat off of ebay. I did a search, but not sure as to the pipe size to get. So, do I get a 2.5 or 2.25? Also, is the resonator 2.5 in and 2.25 out? Thanks.........
So, do I get a 2.5 or 2.25? Also, is the resonator 2.5 in and 2.25 out? Thanks.........
I would go with 3" in and out (because I could and did
Some of your KR could be coming from heat. That'* why we ice down the SC between runs.
Thread Starter
Senior Member
Posts like a Turbo
Joined: Feb 2004
Posts: 231
Likes: 0
From: Wappingers Falls, NY

Originally Posted by 2000SilverBullet
So, do I get a 2.5 or 2.25? Also, is the resonator 2.5 in and 2.25 out? Thanks.........
I would go with 3" in and out (because I could and did
Some of your KR could be coming from heat. That'* why we ice down the SC between runs.
Thread
Thread Starter
Forum
Replies
Last Post
Toddster
Trouble shooting + Test Procedures
0
Mar 21, 2009 06:24 PM
DanCulkin
Performance, Brainstorming & Tuning
14
Jul 2, 2007 11:02 AM
hvactech
Performance, Brainstorming & Tuning
12
May 10, 2005 10:14 PM



