Intake air temp (IAT) plug test
Thread Starter
Retired Senior Admin
Expert Gearhead
Joined: May 2006
Posts: 29,661
Likes: 43
From: Sheboygan Wisconsin
Intake air temp (IAT) plug test
Locate your IAT sensor, it'* on the tube that goes from your air box to the throttle body.
Remove the plug by lifting the tab, the wiggle and pull the plug. Do not pull on the wires. Check for corrosion or damage, clean or repair if needed.
Remove the plug by lifting the tab, the wiggle and pull the plug. Do not pull on the wires. Check for corrosion or damage, clean or repair if needed.
Thread
Thread Starter
Forum
Replies
Last Post
Danthurs
Trouble shooting + Test Procedures
0
Oct 2, 2009 12:14 PM
Danthurs
Trouble shooting + Test Procedures
0
Oct 1, 2009 01:55 PM
cballweg
Bonneville GXP/ Northstar Powered Cars
6
May 4, 2006 02:37 AM
