3800 torque specs - GM Forum - Buick, Cadillac, Chev, Olds, GMC & Pontiac chat


Specifications and General Information From torque specs to bolt sizes and sequences, the basics and the numbers that you need to know for your GM cars are in here

 
 
 
 
Thread Tools Search this Thread
Old 01-13-2009, 03:54 PM   #1
Retired Senior Admin

Expert Gearhead
Thread Starter
 
Danthurs's Avatar
 
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Thanks: 0
Thanked 16 Times in 13 Posts
Danthurs is a name known to allDanthurs is a name known to allDanthurs is a name known to allDanthurs is a name known to allDanthurs is a name known to allDanthurs is a name known to all
Default 3800 torque specs

Accelerator Control Cable Bracket Bolt 16 Nm (12 ft. lbs.)

Balance Shaft Driven Gear Bolt 22 + 70?Nm (16 + 70?ft. lbs.)

Balance Shaft Retainer Bolt 30 Nm (22 ft. lbs.)

Camshaft Position Sensor Bolt 10 Nm (89 inch lbs.)

Camshaft Sprocket Bolt 100 + 90?Nm (74 + 90?ft. lbs.)

Camshaft Thrust Plate Bolt 15 Nm (11 ft. lbs.)

Canister Purge Solenoid Valve Bracket Bolt (VIN K) 50 Nm (37 ft. lbs.)

Canister Purge Vacuum Switch Bolt (VIN K) 50 Nm (37 ft. lbs.)

Connecting Rod Cap Bolt 27 + 50?Nm (20 + 50?ft. lbs.)

Crankshaft Balancer Bolt 150 + 76?Nm (111 + 76?ft. lbs.)

Crankshaft Main Bearing Cap Bolt 40 + 110?Nm (30 + 110?ft. lbs.)

Crankshaft Main Bearing Cap Bolt (Side) 15 + 45?Nm (11 + 45?ft. lbs.)

Crankshaft Position Sensor Stud 30 Nm (22 ft. lbs.)

Crankshaft Rear Oil Seal Housing Bolt 15 + 50?Nm + (11 + 50?ft. lbs.)

Cylinder Head Bolt 50 + 120?Nm (37 + 120?ft. lbs.)

Drive Belt Tensioner Bracket Bolt/Nut 50 Nm (37 ft. lbs.)

Drive Belt Tensioner Bracket Stud 6 Nm (53 inch lbs.)

EGR Valve Adapter Bolt 50 Nm (37 ft. lbs.)

EGR Valve Inlet Pipe Bolt 29 Nm (21 ft. lbs.)

EGR Valve Nut 29 Nm (21 ft. lbs.)

EGR Valve Outlet Pipe Bolt/Nut 29 Nm (21 ft. lbs.)

Engine Block Coolant Drain Plug (VIN 1) 18 Nm (13 ft. lbs.)

Engine Block Coolant Drain Plug (VIN K) 30 Nm (22 ft. lbs.)

Engine Block Oil Gallery Plug 30 Nm (22 ft. lbs.)

Engine Coolant Temperature Sensor 25 Nm (18 ft. lbs.)

Engine Flywheel Bolt 15 + 50?Nm (11 + 50?ft. lbs.)

Engine Front Cover Bolt/Stud 20 + 40?Nm (15 + 40?ft. lbs.)

Engine Lift Bracket Bolt/Nut/Stud 30 Nm (22 ft. lbs.)

Engine Mount Nut, Lower 78 Nm (58 ft. lbs.)

Engine Mount Nut, Upper 78 Nm (58 ft. lbs.)

Engine Oil Pressure Indicator Switch 16 Nm (12 ft. lbs.)

Exhaust Crossover Heat Shield Nut 20 Nm (15 ft. lbs.)

Exhaust Crossover Pipe Bolt/Stud 20 Nm (15 ft. lbs.)

Exhaust Manifold Bolt/Nut 30 Nm (22 ft. lbs.)

Exhaust Manifold Heat Shield Nut 20 Nm (15 ft. lbs.)

Exhaust Manifold Stud (Inner) 30 Nm (22 ft. lbs.)

Exhaust Manifold Stud (Outer) 10 Nm (89 inch lbs.)

Fuel Injector Rail Nut 10 Nm (89 inch lbs.)

Fuel Injector Rail Stud 25 Nm (18 ft. lbs.)

Fuel Injector Sight Shield Bracket Nut 30 Nm (22 ft. lbs.)

Generator Brace Bracket Bolt 50 Nm (37 ft. lbs.)

Heated Oxygen Sensor 42 Nm (31 ft. lbs.)

ICM Bolt (VIN 1) 30 Nm (22 ft. lbs.)

ICM Nut 50 Nm (37 ft. lbs.)

ICM Stud (VIN K) 6 Nm (53 inch lbs.)

ICM Wiring Harness Bolt 2 Nm (18 inch lbs.)

Idler Pulley Bolt 50 Nm (37 ft. lbs.)

Idler Pulley Bracket Bolt 30 Nm (22 ft. lbs.)

Lower Intake Manifold Bolt 15 Nm (11 ft. lbs.)

MAP Sensor Bolt (VIN 1) 3 Nm (27 inch lbs.)

MAP Sensor Bracket Bolt (VIN 1) 30 Nm (22 ft. lbs.)

Oil Cooler Adapter Connector 50 Nm (37 ft. lbs.)

Oil Filter 30 Nm (22 ft. lbs.)

Oil Filter Adapter Bolt 15 + 50?Nm (11 + 50?ft. lbs.)

Oil Level Indicator Switch 20 Nm (15 ft. lbs.)

Oil Level Indicator Tube Nut 19 Nm (14 ft. lbs.)

Oil Pan Bolt 14 Nm (125 inch lbs.)

Oil Pan Drain Plug 30 Nm (22 ft. lbs.)

Oil Pump Cover Screw 11 Nm (98 inch lbs.)

Oil Pump Screen Bolt 15 Nm (11 ft. lbs.)

Power Brake Booster Heat Shield Nut 20 Nm (15 ft. lbs.)

Spark Plug 27 Nm (20 ft. lbs.)

Starter Motor Heat Shield Bolt 30 Nm (22 ft. lbs.)

Supercharger Bolt/Stud (VIN 1) 23 Nm (17 ft. lbs.)

Supercharger Bypass Valve and Fuel Pressure Regulator Valve Harness Bolt (VIN 1) 10 Nm (89 inch lbs.)

Supercharger Bypass Valve Nut (VIN 1) 8 Nm (71 inch lbs.)

Throttle Body Nut 10 Nm (89 inch lbs.)

Throttle Body Support Bolt (VIN K) 10 Nm (89 inch lbs.)

Timing Chain Dampener Bolt 22 Nm (16 ft. lbs.)

Upper Intake Manifold Bolt (VIN K) 10 Nm (89 inch lbs.)

Valve Lifter Guide Retainer Bolt 30 Nm (22 ft. lbs.)

Valve Rocker Arm Bolt 15 + 90?Nm (11 + 90?ft. lbs.)

Valve Rocker Arm Cover Bolt 10 Nm (89 inch lbs.)

Water Outlet Bolt 27 Nm (20 ft. lbs.)

Water Pump Bolt 15 + 80?Nm (11 + 80?ft. lbs.)

Water Pump Pulley Bolt 13 Nm (116 inch lbs.)

Wiring Harness Shield Bolt/Nut 10 Nm (89 inch lbs.)

Last edited by Danthurs; 03-05-2009 at 04:30 PM.
Danthurs is offline  
 
 
 

Related Topics
Thread Thread Starter Forum Replies Last Post
Needin help with Torque Specs for my late model Olds with the older Style 3800 V6 DeathDealer General GM Chat 2 03-01-2011 07:55 AM
need torque specs toneloc60 General GM Chat 8 01-21-2004 07:09 PM
Torque specs for STB Jim W 1987-1991 46 07-22-2003 01:44 AM
I need torque specs! G2SSEi95 1992-1999 3 03-15-2003 11:12 AM
Torque Specs jonmykel 1992-1999 2 03-11-2003 01:30 PM


Tags
3800 torque specs, torque, torque specifications, torque specs

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -4. The time now is 08:57 PM.


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.