Radio Display Lights Out
Retired Senior Admin
Expert Gearhead
Joined: May 2006
Posts: 29,661
Likes: 43
From: Sheboygan Wisconsin
I personally have never done it, but you will need to remove the radio, then open it up. Find the bulbs and remove them. Go to radio shack and buy replacements and solder them in. That'* about all I can tell you.
Senior Member
True Car Nut
Joined: Jan 2009
Posts: 7,122
Likes: 0
From: Dover, NH
take a look here http://www.mnrelectronics.com/noname.html
if you are no good at soldering then this is the option you will want to go with. complete face plates for $50
if you are no good at soldering then this is the option you will want to go with. complete face plates for $50
Senior Member
True Car Nut
Joined: Jun 2007
Posts: 2,478
Likes: 0
From: New Lenox, IL
take a look here http://www.mnrelectronics.com/noname.html
if you are no good at soldering then this is the option you will want to go with. complete face plates for $50
if you are no good at soldering then this is the option you will want to go with. complete face plates for $50
Thread
Thread Starter
Forum
Replies
Last Post
seanohio
Everything Electrical & Electronic
4
May 28, 2009 06:43 AM