2000-2005 Discuss your 2000-2005 Bonneville SE, SLE, and SSEi Please use General Chat for non-mechanical issues, and Performance and Brainstorming for improvements.

Radio display lighting is out

Thread Tools
 
Search this Thread
 
Old Nov 12, 2004 | 10:15 PM
  #1  
Nebssei's Avatar
Thread Starter
Member
Posts like a V-Tak
 
Joined: Apr 2004
Posts: 40
Likes: 0
From: Nebraska
Nebssei is on a distinguished road
Default Radio display lighting is out

on my 2000 SSEI. What is the fix? I've read that there is internal light bulb, hard wired inside...?
I am not interested in aftermarket upgrades, just want to fix what I got. Suggestions?
Reply
Old Nov 17, 2004 | 08:03 PM
  #2  
eds2000bonn's Avatar
Junior Member
Posts like a Ricer Type-R
 
Joined: Jan 2004
Posts: 20
Likes: 0
From: Georgia
eds2000bonn is on a distinguished road
Default

Not sure of the answer, all I can tell you is I had similar problem (part of display was out) on my 2000 while still under warranty and the entire radio got chaged out. Not sure if this is the only fix... seems excessive if so.
Reply
Old Nov 17, 2004 | 09:42 PM
  #3  
Rogue's Avatar
Senior Member
True Car Nut
 
Joined: Jul 2003
Posts: 6,127
Likes: 1
From: Westerville, Ohio 2000 Black SSEi
Rogue is on a distinguished road
Default

My middle led is out as well. Dealer said whole radio needed to be changed. I just havent gotten around to having it done under warranty.
Reply
Old Dec 24, 2004 | 04:19 PM
  #4  
Nebssei's Avatar
Thread Starter
Member
Posts like a V-Tak
 
Joined: Apr 2004
Posts: 40
Likes: 0
From: Nebraska
Nebssei is on a distinguished road
Default radio

After reading some forums.... I pulled the radio out and sent it in to repair shop.

Freight (both ways) and display lighting repair was under $100.

And yes the dealer answer was a new radio at $250 +
Reply
Old Dec 25, 2004 | 02:22 AM
  #5  
PontiacDad's Avatar
Senior Member
True Car Nut
 
Joined: Jun 2003
Posts: 6,313
Likes: 2
From: Purgatory
PontiacDad is on a distinguished road
Default

Can you share the addy with us, there are a few others who could benifit to know where they can get this done.
Reply
Old Dec 25, 2004 | 08:52 PM
  #6  
Ireli's Avatar
Senior Member
Posts like a Northstar
 
Joined: Dec 2004
Posts: 757
Likes: 0
From: Troy, Michigan
Ireli is on a distinguished road
Default

Yes!!!!!
I totally agree with PontiacDaddy! I would also like to know where you fixed that thing.
Also, some instructions on how to remove / place the stereo on a 1997 Bonnie would really help. ---- Please...
Reply
Old Dec 25, 2004 | 09:35 PM
  #7  
Nebssei's Avatar
Thread Starter
Member
Posts like a V-Tak
 
Joined: Apr 2004
Posts: 40
Likes: 0
From: Nebraska
Nebssei is on a distinguished road
Default radio

Southern Electronics was the repairshop that I used

see www.carradio.com for details

Radio was very easily removed from the 2000. The whole instrument benzel cover had to come off to allow axcess to the radio. That include removing the ring around the ignition switch, removal of the "heads up switch" and removal of the functions switch for dash display.
Raio was held in with four clips that are easy to depress and remove radio.
Reply
Old Dec 26, 2004 | 11:33 AM
  #8  
1993 SLE's Avatar
Senior Member
Certified Car Nut
 
Joined: Oct 2003
Posts: 19,756
Likes: 1
1993 SLE is on a distinguished road
Default

Originally Posted by Ireli
Also, some instructions on how to remove / place the stereo on a 1997 Bonnie would really help. ---- Please...
you need to remove the IP trim panel. It is held in by little clips, it goes the whole way from the left of the steering wheel to the radio and hte HVAC. You can just give it a little tug and it should come loose. You will need to work your was around the trim panel and get all the clips loose Then you will have access to radio screws
Reply
Old Dec 27, 2004 | 12:40 AM
  #9  
macho_mike21's Avatar
Senior Member
True Car Nut
 
Joined: Jan 2003
Posts: 3,734
Likes: 0
From: Bloomington-Normal, IL 1997 SE
macho_mike21 is on a distinguished road
Default

We have two lights out in the 2000. My 97 had the one light behind it go out, I pulled the thing, took it apart and soldered in a new bulb (used turn signal bulb). It was pretty easy. I have not taken the 2000 apart yet due to time.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
kirkoff
Everything Electrical & Electronic
0
Jul 20, 2009 01:51 PM
seanohio
Everything Electrical & Electronic
4
May 28, 2009 06:43 AM
SSE Motorhead
Audio (and aftermarket electronics)
4
Nov 5, 2006 12:13 AM
DONKY4444
2000-2005
18
Oct 23, 2005 02:26 AM
miles26
1992-1999
1
Jul 23, 2005 09:00 AM




All times are GMT -4. The time now is 12:40 PM.