Help with Code translation
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Dec 2009
Location: Powhatan, VA
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Help with Code translation
I have a 1994 Bonneville LE (Vin# 1G2H X52L 1R42 30062) that has started running rough, had a friend read the codes with a Tech1
History: (3 codes listed)
PO123 - TP SENSOR
P1361 - IC TOGGLE SIGNAL
P1406 - EGR PENTLE ERROR
Current: (1 code listed)
P1361 - IC TOGGLE SIGNAL
Any suggestions on what to replace to solve my problem.
Thanks for any help and feel free to ask any questions to help diagnose problem!
Ed
History: (3 codes listed)
PO123 - TP SENSOR
P1361 - IC TOGGLE SIGNAL
P1406 - EGR PENTLE ERROR
Current: (1 code listed)
P1361 - IC TOGGLE SIGNAL
Any suggestions on what to replace to solve my problem.
Thanks for any help and feel free to ask any questions to help diagnose problem!
Ed
#2
Retired Senior Admin
Expert Gearhead
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
P0123 https://www.gmforum.com/showthread.p...67#post1390951
P1361 https://www.gmforum.com/showthread.p...52#post1391299
I don't have the P1406 here, but it'* a EGR pintal code. From the sounds of it there'* a wiring problem. I would check to make sure nothing is pinched. Read over the links I posted, see if that helps. Also clear the codes and see if they come back.
P1361 https://www.gmforum.com/showthread.p...52#post1391299
I don't have the P1406 here, but it'* a EGR pintal code. From the sounds of it there'* a wiring problem. I would check to make sure nothing is pinched. Read over the links I posted, see if that helps. Also clear the codes and see if they come back.
#4
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Dec 2009
Location: Powhatan, VA
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
I had my friend clear all the codes yesterday and as soon as I started the car, P1361 code reappeared. We cleared it again and it came right back up. After reading the above links, I guess I need to replace the ICM, any links available on how to replace. Thanks again for your help!
Ed
Ed
Thread
Thread Starter
Forum
Replies
Last Post