Originally Posted by da_grey_goose_95

so ive noticed that im missing something on my motor that i often see on the Series II 3800...same 95 Bonnie as usual....only thing is i had a motor put about 6 years ago...i dont even remember which series i had in the beggining...but it went out...a shop installed a motor out of a 99 grand prix....long story short...why am i missing the MAP set up...im attaching pictures of what other 3800 have compared to mine...

The 1st two pictures are the way mines throttle body is set up...two that lead to the canister purge and trans vacuum modulator...out to fuel regulator...

the 2nd two pictures are set ups that i see regularly..one whole in throttle body leading to MAP sensor, canister purge.

Originally Posted by da_grey_goose_95

so ive noticed that im missing something on my motor that i often see on the Series II 3800...same 95 Bonnie as usual....only thing is i had a motor put about 6 years ago...i dont even remember which series i had in the beggining...but it went out...a shop installed a motor out of a 99 grand prix....long story short...why am i missing the MAP set up...im attaching pictures of what other 3800 have compared to mine...

The 1st two pictures are the way mines throttle body is set up...two that lead to the canister purge and trans vacuum modulator...out to fuel regulator...

the 2nd two pictures are set ups that i see regularly..one whole in throttle body leading to MAP sensor, canister purge.

Originally Posted by Crazwolf15_YT

we're does the white connection go to thats on the valve i only have 1 tube and i dont no were its supposed to go