Looks like I have a major oil leak coming from the top of the engine. This is a freebee for a gal taking care of mom in her last months. I don't have any manuals for this 3100 so I need torque specs if someone know where I can see them or find em I have a 3800 so can use them as a guide I suppose. well better see about a gasket set an get started tearing this down.Oh any pitfalls I should keep an eye out for?

Your gonna want to keep everything as clean as you can i will see if i can find you the specs later im on my phone currently so i will post what/ if anything i find

id get the whole set and felpro makes a good gasket, these are the updated ones, the oems one where really problematic

Type: Bolt Dim: Length: Head: Hexagon Grade:
9.58 Ft-Lbs
or
115 In-Lbs
13 N-m
Connects: Intake Manifold To Cylinder Head
Years: All Vote Record: 0/1(0%)
Note: 3100 - Lower Bolts - 2 Steps: 5 FtLbs; 9.58 FtLbs
Type: Bolt Dim: Length: Head: Nut Grade:
18 Ft-Lbs
216 In-Lbs
24.4 N-m
Connects: Intake Manifold To Cylinder Head
Years: All Vote Record: Vote
Note: 3100 - Upper Bolts/Studs

|9|5 | 3| 2| 7| 11|
|--------------------|
|10|6 | 1| 4| 8| 12|

hope this helps

Thanks that will help a bunch.