What Gatorback belt with 3.4" pulley?
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Sep 2002
Location: Genoa, Illinois
Posts: 4,013
Likes: 0
Received 0 Likes
on
0 Posts
What Gatorback belt with 3.4" pulley?
Anyone know the exact part number Gatorback belt I need with a 3.4" pulley? I had an Intense installer install the pulley today, but I only had a stock length belt...so she'* a little too close for comfort by the tensioner. So, whats the part number for the belt I need? I believe its an inch shorter than stock right?
#2
If I remember correctly, stock is about 72.4", so a 71.5" belt should be perfect. By the way, we list all these applications on the Belts page of our website for your convenience.
Hope this helps.
Scott
Hope this helps.
Scott
#3
Senior Member
Certified GM nut
Join Date: Jul 2003
Location: Chicagoland
Posts: 1,712
Likes: 0
Received 0 Likes
on
0 Posts
My belts tighter than your Belt! lol cool meeting you today Kyle, get that slack taken care of. See you around. oh and how did you like the 3.4 drive home? You gotta get some cold air flowing.
#4
Senior Member
True Car Nut
Thread Starter
Join Date: Sep 2002
Location: Genoa, Illinois
Posts: 4,013
Likes: 0
Received 0 Likes
on
0 Posts
I'm guessing the GB6-715 is it right?
Ack, already ordered PCM, guess I make a second order.
Oh Taylor...the ride home was amazing!
Ack, already ordered PCM, guess I make a second order.
Oh Taylor...the ride home was amazing!
#7
Senior Member
Certified GM nut
Join Date: Jul 2003
Location: Chicagoland
Posts: 1,712
Likes: 0
Received 0 Likes
on
0 Posts
IT wouldn't fit Will, I had one handy and there was NO WAY one would fit on Kyles SSEi, the belts would rub for sure. He needs a new belt that one had a lot of play, not crazy style, just would of liked to see it tighter, than an Idler could of fit.
We found out today that a Thrasher CAI box will fit in his car.
We found out today that a Thrasher CAI box will fit in his car.
#8
Senior Member
True Car Nut
Join Date: Jul 2003
Location: Westerville, Ohio 2000 Black SSEi
Posts: 6,127
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by Allmachtige
I'm guessing the GB6-715 is it right?
Ack, already ordered PCM, guess I make a second order.
Oh Taylor...the ride home was amazing!
Ack, already ordered PCM, guess I make a second order.
Oh Taylor...the ride home was amazing!
#9
Senior Member
True Car Nut
Thread Starter
Join Date: Sep 2002
Location: Genoa, Illinois
Posts: 4,013
Likes: 0
Received 0 Likes
on
0 Posts
Doesn't anyone know the full part number for the belt? I thought I could just go to an Autozone and pick one up (I did on the 94, but then again that was a stock size replacement).
#10
Junior Member
Posts like a Ricer Type-R
Originally Posted by TaylorD
IT wouldn't fit Will, I had one handy and there was NO WAY one would fit on Kyles SSEi, the belts would rub for sure. He needs a new belt that one had a lot of play, not crazy style, just would of liked to see it tighter, than an Idler could of fit.
We found out today that a Thrasher CAI box will fit in his car.
We found out today that a Thrasher CAI box will fit in his car.
Granted it'* much more important on a Series 1 running a 2.2" pulley as far as belt wrap is concerned, but still not a bad idea for the 94/95 or S2 L67'*.