Wanna be faster
09-08-2004, 10:10 AM
#11
Senior Member
True Car Nut
Join Date: Jan 2004
Location: Chicago,IL MWBF '04 SURVIVOR MWBF '05 SURVIVOR Napa Manager
Posts: 3,955
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Rogue
Your PCM is the powertrain control module, its the brain for your motor. There is a lot of code inside it that restricts power based on a number of criteria. You can read about it here.
INTENSE PCM
The pulley size you want to go to is a 3.4, stock is 3.8. This will move more air and increase your HP and Torque by about 25HP and 40 ft/lbs.
INTENSE Moduler Pulley System
1.9:1 Ratio Rockers will increase the amount of air moving into the cylinders. Stock is 1.6:1. This will give you about 30hp and increase your top end acceleration.
INTENSE 3rd Gen Rockers
INTENSE PCM
The pulley size you want to go to is a 3.4, stock is 3.8. This will move more air and increase your HP and Torque by about 25HP and 40 ft/lbs.
INTENSE Moduler Pulley System
1.9:1 Ratio Rockers will increase the amount of air moving into the cylinders. Stock is 1.6:1. This will give you about 30hp and increase your top end acceleration.
INTENSE 3rd Gen Rockers
09-08-2004, 10:30 AM
#13
Senior Member
True Car Nut
Join Date: Jan 2004
Location: Chicago,IL MWBF '04 SURVIVOR MWBF '05 SURVIVOR Napa Manager
Posts: 3,955
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Rogue
Please be aware that all of the above, and in fact everything from INTENSE, is only made for Series II engines.
09-09-2004, 10:24 AM
#14
Junior Member
Thread Starter
Join Date: Sep 2004
Location: Illinois
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Thanx guys. You're helping me more then you know. And Ken I've sene your ride on car domain before. I knew it as soon as it popped and said Bone Evil. It'* nice a bonny and keep the good work on it. I love the Subs too hehe 
Anyway back to business.
I looked up the pcm and I was curious... Do I go with the Standard pcm or could I use the Stage one and get away with it?
I also looked up the Pulley and I'm not sure what size to get between 2.6 and 3.4? Any recommendations?
And as for the rocker arms... If I get the 3rd Gen rocker arms will I need to isntall an aftermarket cramshaft?
Thanx again.
Anyway back to business.
I looked up the pcm and I was curious... Do I go with the Standard pcm or could I use the Stage one and get away with it?
I also looked up the Pulley and I'm not sure what size to get between 2.6 and 3.4? Any recommendations?
And as for the rocker arms... If I get the 3rd Gen rocker arms will I need to isntall an aftermarket cramshaft?
Thanx again.
09-09-2004, 10:28 AM
#15
Senior Member
True Car Nut
Join Date: Sep 2002
Posts: 8,910
Likes: 0
Received 0 Likes
on
0 Posts
Start with the 3.4" pulley. Any smaller and youll have serious heat and KR issues.
With the 3rd gen rockers, you can keep your stock cam. But I would upgrade to stiffer valvesprings, like the LS6 springs. You would also want oil-restricted pushrods, and some good retainers. And as for the PCM, stick with the standard unless you upgrade your cam.
With the 3rd gen rockers, you can keep your stock cam. But I would upgrade to stiffer valvesprings, like the LS6 springs. You would also want oil-restricted pushrods, and some good retainers. And as for the PCM, stick with the standard unless you upgrade your cam.
09-09-2004, 10:37 AM
#17
Senior Member
True Car Nut
Join Date: Sep 2002
Posts: 8,910
Likes: 0
Received 0 Likes
on
0 Posts
If you run a 3.4" pulley, you are going to want colder spark plugs. Autolite 605 (1 range colder), or Autolite 104 (2 colder) will keep KR down. Opening your exhaust and intake keeps it down too, and a colder thermostat helps as well.
With rockers, you might be able to get away with using a 3.25" pulley, but I would start with a 3.4" for now.
Read about KR here: http://www.zzperformance.com/zzp/inf...d/kr_about.htm
With rockers, you might be able to get away with using a 3.25" pulley, but I would start with a 3.4" for now.
Read about KR here: http://www.zzperformance.com/zzp/inf...d/kr_about.htm
09-09-2004, 10:53 AM
#19
Senior Member
True Car Nut
Join Date: Jul 2003
Location: Westerville, Ohio 2000 Black SSEi
Posts: 6,127
Likes: 0
Received 1 Like
on
1 Post
You will want a 3.4 pulley and the INTENSE standard PCM.
The stage 1 pcm is for people with camshaft upgrades. You can not use any thing other than a stock cam with the 1.9 rockers as the lift will be too much for stock heads. Rockers will let your car breath a little better and along with a cooler tstat and plugs and cold air intake will probably allow you to run a 3.4 with minimal KR.
The stage 1 pcm is for people with camshaft upgrades. You can not use any thing other than a stock cam with the 1.9 rockers as the lift will be too much for stock heads. Rockers will let your car breath a little better and along with a cooler tstat and plugs and cold air intake will probably allow you to run a 3.4 with minimal KR.
Thread
Thread Starter
Forum
Replies
Last Post
98 Bonneville SSEi
Performance, Brainstorming & Tuning
15
08-11-2011 10:06 PM
kippc
Performance, Brainstorming & Tuning
5
01-07-2003 09:15 PM
ridic2002
Performance, Brainstorming & Tuning
9
09-06-2002 09:03 AM