transmission options-solution found! (pix page 3)
Guest
Posts: n/a
1 Axle is the same on your car as whats used on a 95-96 the other has a diffrent number..
Its strange that the 95-96 Bonneville 3.06 or 2.97 used the same axles...
* Runs off to do more research *
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Its strange that the 95-96 Bonneville 3.06 or 2.97 used the same axles...
* Runs off to do more research *
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Thread Starter
Senior Member
True Car Nut
Joined: Aug 2004
Posts: 3,067
Likes: 1
From: In your garage, swipin' da lug nutz
Well, that'* semi-good news.
This means if worse came to worse, I'll go get a new axle and wheel bearing
Don, you getting belted with storms yet?
This means if worse came to worse, I'll go get a new axle and wheel bearing
Don, you getting belted with storms yet?
Guest
Posts: n/a
Originally Posted by sandrock
Well, that'* semi-good news.
This means if worse came to worse, I'll go get a new axle and wheel bearing
Don, you getting belted with storms yet?
This means if worse came to worse, I'll go get a new axle and wheel bearing
Don, you getting belted with storms yet?
The research was really confusing... Good news is that any 3.06 ratio or L67 for 95-96 used the exact same axles..
And yes buddy... Storms are coming my way now...
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Guest
Posts: n/a
Cool... When do you plan on picking it up?
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Retired
Certified Car Nut
Joined: Jul 2003
Posts: 17,960
Likes: 1,839
From: Dark Side, AZ
Didn't Haro make some measurements of the 3.06 HD and 3.06 non-HD? Size difference?
Gotta watch out for those pitch changes.
I know PCM will burp a CEL at you because of the gear ratio.
Gotta check my ATSG manual.....
Gotta watch out for those pitch changes.
I know PCM will burp a CEL at you because of the gear ratio.
Gotta check my ATSG manual.....
Guest
Posts: n/a
Originally Posted by Mike1995
Didn't Haro make some measurements of the 3.06 HD and 3.06 non-HD? Size difference?
Gotta watch out for those pitch changes.
I know PCM will burp a CEL at you because of the gear ratio.
Gotta check my ATSG manual.....
Gotta watch out for those pitch changes.
I know PCM will burp a CEL at you because of the gear ratio.
Gotta check my ATSG manual.....
The 95 Trans has a fine pitch, the 96 has the fine pitch in the opposite direction( same as the regular ).. But for 95-96 the pitch does not matter, if you had the L67 or the L36 with the 3.06 ratio you got the same axles..
From what I can gather one axle is the same on the 93 as it would be on the 95-96... The other side has a different PN.. I'm actually wondering if this is a CV design change..
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote