Here is a concept for my 95 ..... Not finished yet. when complete I will have 2 M62 Blowers.... Inter-cooler, Turning a little slower with a common larger throttle body.... More to follow. Should move a little air. Will have to talk with GM Tuners for a little chip Modification.
Planning on building this over the summer. Need to add Injectors, Fuel Rails, etc...
Salmanman

is it gonna fit under the hood?

As long as you don't mount the blowers right on top... should fit. Looks just a little taller than the UIIM/M62 combo we already have.

twin charged....oooo

i am not able to visualize where both blowers are gonna sit

The blowers will sit ~5" above hood level. Currently modifying hood to add 6" cowl to allow the install.

Blowers are mounted at 45 to the base plate. Currently designing the adapter for this. having to revers engineer everything is a pita.

Does anyone have the current flow numbers for our heads - Stock? Currently porting and polishing a set with the help of a shop with a flow bench. will need to increase the flow quit a bit.

Planning on using a larger common throttle body thats I can get from yella-terra. A little 3" "Y" and some other equip like billet fuel rails and injector ports, pcv, EGR, and plumbing. and the NOS setup that I have now. and who knows.... could be fun.

Salmanman

crude, but like this?

Ummmmm......aren't the ports off in spacing by a bit? Where'* the stagger?

That'* a good question that I should have noticed. Looks like they are staggered some, but it doesn't look like enough.